User's Manual Part 1b

5. DSC GENERAL MESSAGE CALLING, RECEIVING
5-5
Able acknowledge call received
1) Press the CANCEL key to silence the audio alarm and erase the pop-up mes-
sage.
2) The working frequency is automatically set; you can communicate by radio-
telephone or NBDP (see the following "How to send message by NBDP ter-
minal unit").
3) After you have completed communications, rotate the ENTER knob to select
[QUIT] in the user options area then push the knob.
How to send message by NBDP terminal unit
The message "STATION ENTRY COMPLETED FROM DSC. Press any key to
escape." appears on the screen of the NBDP terminal unit.
1) Press any key on the NBDP terminal unit to erase the message.
2) Press the function key F3 on the keyboard of the NBDP terminal unit to open
the [Operate] menu.
3) Select [Call Station] then press the Enter key.
4) With [DSC] selected; press the Enter key. "Connect" appears in reverse vid-
eo.
5) Type and transmit your message.
6) After you send the message, press the function key F10 to disconnect the line.
Able to change frequency acknowledge call received
This call means that the station you sent the individual call to accepts your call with
the frequency or communication mode that the station requires.
1) Press the CANCEL key to silence the audio alarm and erase the pop-up mes-
sage. The following message appears on the screen.
2) Press the CANCEL key to erase the message. The working frequency is
changed to one that the station requires. You can communicate by radiotele-
phone or NBDP, whichever the station requires.
3) After you have completed communications, rotate the ENTER knob to select
[QUIT] in the user options area then push the knob.
[ACKNOWLEDGED] ELAPSED TIME:
INDIV ABLE ACK 00H00M04S
FROM :
123456789 CAPTAIN_5075
COMM MODE :
TELEPHONE
COMM FREQ : TX 2170.0 /RX 2170.0 kHz
INFO PRINT HOLD QUIT
TX 6500.0/ RX 6500.00 kHz