MARINE RADAR MODEL1722/1732/1742/1762 MODEL1722C/1732C/1742C/1762C
C Yo u r L o c a l A g e n t/D e a le r 9-52, A shihara-cho, N ishinom iya, Japan Te l e p h o n e : Te l e f a x : 0 7 9 8 -6 5 -2 111 0798-65-4200 A ll rig h ts re s e rv e d . Printed in Japan PUB. No. OM E-34940 (D A M I) M O D E L1722/C S E R IE S FIRST EDITIO N D : : APR. O C T.
SAFETY INSTRUCTIONS WARNING WARNING Radio Frequency Radiation Hazard ELECTRICAL SHOCK HAZARD Do not open the equipment. Only qualified personnel should work inside the equipment. The radar antenna emits electromagnetic radio frequency (RF) energy which can be harmful, particularly to your eyes. Never look directly into the antenna aperture from a close distance while the radar is in operation or expose yourself to the transmitting antenna at a close distance. Do not disassemble or modify the equipment.
TABLE OF CONTENTS TABLE OF CONTENTS ........................................................................................ ii FOREWORD....................................................................................................... viii SYSTEM CONFIGURATIONS............................................................................... x 1. OPERATIONAL OVERVIEW .........................................................................1-1 1.1 Operating Controls ........................................
2.9 Presentation Mode .....................................................................................................2-9 2.9.1 Selecting a presentation mode ........................................................................2-9 2.9.2 Description of presentation modes.................................................................2-10 2.10 Measuring the Range...............................................................................................2-12 2.10.1 Measuring range by range rings ..
2.25 ARP (option), TTM operation ................................................................................... 2-34 2.25.1 Activating/deactivating ARP, TTM.................................................................. 2-35 2.25.2 Acquiring and tracking targets (ARP only) ..................................................... 2-36 2.25.3 Displaying target number (internal, external ARP) ......................................... 2-37 2.25.4 Terminating tracking of ARP targets ........................
3.9 3.10 3.11 3.12 3.13 3.8.3 Erasing waypoints .........................................................................................3-34 3.8.4 Changing waypoint mark size (FURUNO, NavCharts™) ...............................3-35 3.8.5 Searching waypoints......................................................................................3-36 Routes .....................................................................................................................3-37 3.9.1 Creating routes.........
4.10 Picture Advance Speed............................................................................................4-16 4.10.1 Advancement independent of ship’s speed....................................................4-16 4.10.2 Advancement synchronized with ship’s speed ...............................................4-17 4.11 Display Colors (MODEL1722C series) .....................................................................4-18 4.12 Alarms...........................................................
6. DATA TRANSFER ......................................................................................... 6-1 6.1 Memory Card Operations........................................................................................... 6-1 6.1.1 Formatting memory cards................................................................................ 6-1 6.1.2 Saving data to a memory card......................................................................... 6-2 6.1.3 Playing back data from a memory card ..........
FOREWORD A Word to the Owner of the MODEL1722/1722C Series Marine Radar FURUNO Electric Company thanks you for purchasing the MODEL1722/1722C Series Marine Radar. We are confident you will discover why the FURUNO name has become synonymous with quality and reliability. For over 50 years FURUNO Electric Company has enjoyed an enviable reputation for quality and reliability throughout the world. This dedication to excellence is furthered by our extensive global network of agents and dealers.
FOREWORD Features The MODEL1722/1722C series work within our new product-network system called the “NavNet.” Each product has an IP address to communicate with NavNet compatible products within the network, using TCP/IP protocol through an Ethernet 10 Base-T network. The main features are ! Bright 7” screen visible even under direct sunlight. ! User friendly operation with combination of discrete keys, soft keys and cursor pad. ! Accepts FURUNO and Nav-charts™ (NAVIONICS) or C-MAP charts.
SYSTEM CONFIGURATIONS All NavNet products incorporate a “network circuit board” to integrate each NavNet product on board through an optional LAN cable (Ethernet 10BASE-T). Each NavNet product is assigned an IP address to enable transfer of images between other NavNet products. For example, video plotter pictures can be transferred to a radar and vice versa. Pictures received via the NavNet may be adjusted at the receiving end. A NavNet system may consist of up to four display units and one ETR.
Two-unit NavNet system GP-310B Antenna Unit Radar data Plotter data Two-unit NavNet system Three-or more unit NavNet system (Max. 4 NavNet capable display units) GP-310B Antenna Unit Radar data Plotter data HUB Sounder data Network sounder ETR-6/10N Note: The picture disappears 10 seconds after the NavNet cable is disconnected from a "sub" NavNet display unit.
1. OPERATIONAL OVERVIEW This chapter provides basic information needed to get you started using your radar. The follow topics are presented: • • • • • • • • Control overview Chart card insertion Power on/off Contrast, brilliance and hue (Color series only) adjustments Display selection Data boxes Function keys Simulation display NOTICE The brilliance of the LCD is adjustable to match a wide variety of lighting conditions.
1. OPERATIONAL OVERVIEW 1.1 Operating Controls 1.1.1 Display unit controls Overview of display unit controls The radar systems are mainly operated with controls of the display unit (and remote controller). Ten keys are labeled and they provide the function shown on their labels. The five soft keys provide various functions according to current operating mode. The [ENTER] knob mainly functions to register selections on the menu and enter alphanumeric data.
1. OPERATIONAL OVERVIEW Soft keys The five soft keys’ functions change according to the operation. Their labels for their current functions are shown on the screen to the left of the keys. To hide or show the soft keys, press the [HIDE/SHOW] key. Each press of the key shows preset soft keys, user function keys or turns off navigation information (at the top of the screen). SOFT KEYS Display unit Some soft keys show the current state of the soft key function in reverse video as shown below. .250/SP.
1. OPERATIONAL OVERVIEW [ENTER] knob The [ENTER] knob functions to • • • • Register data Enter alphanumeric data such as waypoint name Select menu items and options Adjust setting Clockwise rotation of the knob selects an alphabet, symbol or numeric, in one of the sequences shown below. After you have selected desired alphanumeric character push the [ENTER] knob to register your selection.
1. OPERATIONAL OVERVIEW 1.1.2 Remote controller SAVE RANGE MOB DISP ABC 1 DEF 2 GHI 3 JKL 4 MNO 5 PQR 6 STU 7 VWX 8 YZ& 9 ’# 0 EBL/VRM WPT Operating distance 90°: Up to 5 m ±45°: Up to 3 m Replace the batteries (AA) when the distance from which the display unit can be operated shortens. Note: The remote controller may become damaged if dropped. Mishandling of the remote controller is not covered by the warranty.
1. OPERATIONAL OVERVIEW 1.2 Inserting a Chart Card Your unit reads FURUNO and Nav-Charts™ (NAVIONICS), or C-MAP chart cards, depending on its specifications. Insert the appropriate chart card for your area as follows: 1. Open the chart card slot lid. Chart slot Display unit 2. Insert desired chart card groove side up. 3. Close the lid to protect the chart drive. Note 1: Do not insert or remove the chart card while turning power on. This may cause the equipment to freeze.
1. OPERATIONAL OVERVIEW 1.3 Turning the Unit On/Off Press the [POWER/BRILL] key to turn the unit on. A beep sounds and the equipment proceeds in the sequence shown below, displaying the product information screen, startup test results and the chart usage disclaimer, in that order. The startup test checks the ROM, RAM, internal battery and backup data for proper operation, displaying the results for each as OK or NG (No Good). If NG appears, an appropriate message appears on the screen.
1. OPERATIONAL OVERVIEW 1.4 Cursor Pad, Cursor The cursor pad mainly functions to shift the cursor, for measurement of range and bearing to a location (radar) and latitude and longitude position (plotter). Operate the cursor pad to shift the cursor. The cursor moves in the direction of the arrow or diagonal pressed, on the cursor pad. For the plotter display, the cursor can be turned off with the CENTER soft key. This also returns own ship marker to the screen center. .250/SP.125nm Cursor H-UP 319.
1. OPERATIONAL OVERVIEW 1.5 Display Brilliance, Panel Brilliance, Contrast, Hue You can adjust display brilliance, panel brilliance, contrast and hue (MODEL1722C series only) as shown below. 1.5.1 Display brilliance, panel brilliance 1. Press the [POWER/BRILL] key momentarily. A set of soft keys for adjustment of brilliance, contrast and hue (MODEL1722C series only) appear. The last-used adjustment window appears. In the example below the display brilliance adjustment window is shown.
1. OPERATIONAL OVERVIEW 1.5.2 Contrast 1. Press the [POWER/BRILL] key momentarily. 2. Press the CONTST (monochrome) or CONTST/HUE (color) soft key. 3. For MODEL1722C series, two soft keys appear at the pressing of the CONTST/HUE soft key: CONTST and HUE. Press the CONTST soft key to adjust the contrast. CONTRAST 8 Contrast window 4. Adjust the [ENTER] knob, clockwise to raise the setting or counterclockwise to decrease it.
1. OPERATIONAL OVERVIEW 1.6 Selecting a Display 1.6.1 Display modes If you have a navigator and network sounder connected, four full-screen displays are available: radar, plotter, and video sounder and navigation data. (MODEL1722C series have five screens, those mentioned above plus the overlay screen.) In addition to the full-screen display, you can divide the screen into half-screen combination displays to show two sets of images (data). Full screen (Ex. radar) Combination screen (Ex.
1. OPERATIONAL OVERVIEW 1.6.2 Selecting a display 1. Press the [DISP] key to show the full-screen selection window. The icons of modes not available are marked with “X” mark. PAGE1-PAGE5 are user-arrangeable displays called “hot pages,” which you can configure as you like. For further details, see “5.5 Hot Page Setup.” RADAR PLOT SNDR NAV OVRLY Basic display screens Hot pages PAGE1 PAGE2 PAGE3 PAGE4 PAGE5 · TURN KNOB TO SELECT MODE AND PUSH KNOB TO ENTER.
1. OPERATIONAL OVERVIEW 1.6.3 Switching control in combination and overlay screens A soft key is provided in relevant combination and overlay screens (color series only) to switch control between displays. In the example below, the RADAR CNTRL and PLOTTR CNTRL soft keys enable switching control between the radar and plotter screens in the plotter/radar combination display. 12 LP3nm 12 LP3nm H-UP H-UP SIGNAL PROC.
1. OPERATIONAL OVERVIEW 1.6.4 Selecting radar source When other network radar is connected to the equipment, you may select an image source as shown below. This is not necessary when no other network radar is connected. Select one host name for the source though there are two or three radar units on the net. Note: Turn the power off whenever changing the source. 1. Press the [DISP] key. 2. Press any soft key to show the following display.
1. OPERATIONAL OVERVIEW 1.7 Data Boxes Data boxes, providing navigation data, may be shown on any full-screen display. Up to six data boxes (two in case of large characters) may be shown, and the default data boxes are position (in latitude and longitude), course over ground, speed over ground, trip log and cursor position. The user may choose which data to display, where to locate it, and show or hide it as desired.
1. OPERATIONAL OVERVIEW 1.8 Function Keys The function keys provide for one-touch call up of a desired function. The default function key settings are as shown in the table below. 1.8.
1. OPERATIONAL OVERVIEW 1.9 Simulation Display The simulation display, for use by service technicians for demonstration purposes, provides simulated operation to help acquaint you with the many features your unit has to offer. It allows you to view and control a simulated plotter, radar and sounder picture, without position-fixing equipment, network radar or a network sounder.
1. OPERATIONAL OVERVIEW Antenna unit-generated echoes 1. Select RADAR SIMULATION DATA, then press the EDIT soft key. 2. Select YES and push the [ENTER] knob to erase simulation data and get new data. The message “Now getting demo data. Do not turn off display unit.” appears while the unit is receiving radar data. Note: If the network radar could not be found “Radar source is not found. Cannot get demo data.” appears. Wait one minute after the message disappears.
1. OPERATIONAL OVERVIEW Sounder 1. Select SOUNDER, then press the EDIT soft key. SOUNDER ▲ ¡ SIMULATION 1 ¡ SIMULATION 2 ¤ LIVE ▼ 2. Select SIMULATION 1 (internally generated echoes) or SIMULATION 2 (network sounder-generated echoes), then press the [ENTER] knob. Note 1: If the network sounder could not be found “Sounder source is not found. Cannot get simulation data.” appears. And if the sounder is not active, the message “Sounder is not active. Cannot get simulation data.” is displayed.
2. RADAR OPERATION This chapter covers radar operation, including the ARP (Automatic Plotter) function. ARP requires connection of MODEL1833/1833C series network radar equipped with the ARP circuit board. 2.1 Radar Display Cursor Pulselength Range/ range ring interval Presentation mode .125nm ..250 /SP Heading M: Magnetic T: True 319.
2. RADAR OPERATION 2.2 Transmitting, Stand-by 1. Turn the power on. The products information appears and is then followed by the radar screen. You can display the radar screen at once by pressing the any key. 2. Press the [POWER/BRILL] key momentarily. 3. Press the RADAR STBY soft key to highlight TX on its label. 4. When the radar picture is not required, but you want to keep it in a state of readiness, press the [POWER/BRILL] key momentarily followed by RADAR TX soft key. 5.
2. RADAR OPERATION To adjust the receiver gain, transmit on long range, and then do the following: 1. Press the [GAIN] key. The last-used “adjustment window” is displayed. In the example below, the gain sensitivity adjustment is shown. Item selected for adjustment is highlighted. 319.9°M .250/SP.125nm H-UP GAIN ADJUST GAIN A/C SEA A/C RAIN FTC RETURN GAIN SENSITIVITY ¤ AUTO ¡ AUTO ¡ AUTO ¡ MAN ROUGH MODERATE CALM 359.9°R 0.24nm + 0 Gain adjustment soft keys 2.
2. RADAR OPERATION 2.5 Reducing Sea Clutter 2.5.1 How the A/C SEA works Echoes from waves can be troublesome, covering the central part of the display with random signals known as “sea clutter”. The higher the waves and the higher the antenna is above the water, the further the clutter will extend. Sea clutter may affect radar performance because real targets are sometimes hidden by the echoes of small waves. (See the left-hand figure in the figure below.
2. RADAR OPERATION 5. When the radar source is the Model 1833/C series radar, A/C SEA and A/C RAIN can be automatically adjusted. Press the A/C AT soft key to select ON or OFF as appropriate. When turned on, it overrides A/C SEA and A/C RAIN settings. 6. Press the [GAIN] key on the front panel or RETURN soft key to finish. 2.6 Reducing Precipitation Clutter The vertical beamwidth of the antenna is designed to see surface targets even when the ship is rolling.
2. RADAR OPERATION 2.6.2 Adjusting the FTC To suppress rain clutter from heavy storms or scattered rain clutter, adjust the FTC. The FTC splits up these unwanted echoes into a speckled pattern, making recognition of solid targets easier. Note: In addition to reducing clutter, the FTC can be used in fine weather to clarify the picture when navigating in confined waters. However, with the circuit active the receiver is less sensitive.
2. RADAR OPERATION 2.7 Range Scale The range setting determines the size of the area (in nautical miles) that will appear on your display. in addition, the range setting will also automatically adjust the range ring interval so that accurate range measurements may be made while operating on any range setting. The range, range ring interval and pulselength appear at the top left-hand corner of the display. Press the [RANGE (+ or -)] key to change the range scale. Range scales (nm, sm) Range 0.125 0.
2. RADAR OPERATION 2.8 Pulselength The pulselength in use is displayed at the upper left corner of the display. Appropriate pulselengths are preset to individual range scales. Therefore, you are not usually required to select them. If you are not satisfied with the current pulselength setting, however, it is possible to change it for the 1.5 and 3 nm (sm) ranges (3 and 6 kilometer ranges) as below.
2. RADAR OPERATION 2.9 Presentation Mode This unit provides four radar presentation modes: head-up, course-up, north-up and true motion. Heading data is required for modes other than head-up. (When you use the network radar, input the radar source.) 2.9.1 Selecting a presentation mode 1. Press HIDE/SHOW to show soft the radar soft keys. 2. Press the RADAR DISPLY soft key to show the RADAR DISPLAY soft keys. Current mode setting .250/SP.125nm H-UP 319.9°M RADAR DISPLAY .250/SP.125nm H-UP 319.
2. RADAR OPERATION 2.9.2 Description of presentation modes Head-up (HU) A display without azimuth stabilization in which the line connecting the center with the top of the display indicates own ship’s heading. The targets are painted at their measured distances and in their directions relative to own ship’s heading. The short line on the bearing scale is the north marker.
2. RADAR OPERATION North-up (NU) In the north-up mode, targets are painted at their measured distances and in their true (compass) directions from own ship. North is maintained at the top of the screen. The heading line changes its direction according to the ship’s heading. North Heading Line North-up presentation mode True motion (TM) Fixed radar targets maintain a constant position on the screen, while your own ship moves across the radar image at the correct speed and heading.
2. RADAR OPERATION 2.10 Measuring the Range You can measure the range to a radar target three ways: by the range rings, by the cursor, and by the VRM (Variable Range Marker). 2.10.1 Measuring range by range rings Count the number of rings between the center of the display and the target. Check the range ring interval and judge the distance of the echo from the inner edge of the nearest ring. To turn the range rings on, do the following: 1.
2. RADAR OPERATION 2.10.2 Measuring range by cursor Operate the cursor pad to place the cursor intersection on the inside edge of the radar target. The range to the target, as well as the bearing, appears to the right of “+” at the bottom of the display. Target .250/SP.125nm H-UP Cursor 319.9°M SIGNAL PROC. RADAR DISPLY NAV FUNC TARGET ZOOM & D. BOX + 4.3°R 0.
2. RADAR OPERATION 2.10.3 Measuring range by VRM 1. Press the [EBL/VRM] key to display the EBL/VRM soft keys. .250/SP.125nm H-UP 319.9°M EBL VRM EBL1 ON VRM1 ON OFFSET EBL2 ON VRM2 ON 359.9°R 0.240nm + EBL/VRM soft keys 2. Press the VRM1 ON (dotted ring VRM) or VRM2 ON (dashed ring VRM) soft key to select the desired VRM. The selected VRM’s indication, at the bottom of the screen, is highlighted. 3. Rotate the [ENTER] knob the place the VRM on the inside edge of a radar target.
2. RADAR OPERATION 2.10.4 Erasing a VRM, VRM indication Press appropriate VRM soft key and press the [CLEAR] key. The VRM is erased, and its indication becomes blank. 2.10.5 Erasing EBL/VRM data boxes Press the EBL or VRM soft key associated with the EBL/VRM data box you wish to erase. Press the [CLEAR] key once or twice to erase the data box. 2.10.6 Hiding EBL/VRM data boxes Press the ZOOM & D. BOX and D. BOX ON/OFF soft keys to show or hide the EBL/VRM data boxes. 2.10.
2. RADAR OPERATION 319.9°M .250/SP.125nm H-UP EBL VRM EBL1 ON EBL1 (Dotted line) VRM1 ON OFFSET EBL2 ON EBL2 (Dashed line) VRM2 ON EBL2 bearing EBL1 bearing R: Relative T: True EBL1 VRM1 330.1°R -.---nm EBL2 VRM2 234.1°R -.---nm 359.9°R 0.24nm + Active marker is highlighted. How to measure bearing with the EBL Note: Bearing can be shown Relative to ship’s heading (relative) or in reference to North (True).
2. RADAR OPERATION 2.12 Erasing the Heading Line, North Marker The heading line indicates the ship's heading in all presentation modes. The heading line is a line from the own ship position to the outer edge of the radar display area and appears at zero degrees on the bearing scale in head-up mode; it changes its orientation depending on the ship orientation in north-up, course-up and true motion modes. The north marker appears as a short dashed line.
2. RADAR OPERATION 2.14 Reducing Radar Interference Radar interference may occur when near another shipborne radar that is operating in the same frequency band as your radar. Its on-screen appearance looks like many bright dots either scattered at random or in the form of dotted lines extending from the center to the edge of the display. Interference effects are distinguishable from normal echoes because they do not appear in the same place on successive rotations of the scanner.
2. RADAR OPERATION 2.15 Zoom The zoom feature allows you to double the size of the area selected with the zoom circle, which appears at the bottom right- or left-hand corner on the display. The zoom feature is available on any range but is inoperative in true motion and when the display is shifted. 2.15.1 Zooming in on radar targets 1. If not displayed, press the [HIDE/SHOW] key to show the radar soft keys. 2. Press the ZOOM & D. BOX soft key to show ZOOM & D. BOX soft keys. 3.
2. RADAR OPERATION 1. 2. 3. 4. If not displayed, press the [HIDE/SHOW] key to show the radar soft keys. Press the ZOOM/D.BOX soft key to show ZOOM & D.BOX soft keys. Press the ZOOM soft key to select ZOOM ON. Press the ARP TGT ZM soft key. SELECT TARGET NO. ▲ 1 ▼ Target no. selection window 5. Use the [ENTER] knob to select number (1-10) and then push the [ENTER] knob. If the target does not exist several beep sounds and the zoom function is cancelled. To cancel, press the CURSOR LOCK soft key.
2. RADAR OPERATION SHIFT Cursor Place cursor where desired. Press the MANUAL soft key. Shifting the picture manually 2.16.2 Automatic shift The amount of shift is automatically calculated with speed. The maximum shift amount is limited to 60% of the range in use. For example, if you set the shift speed setting for 15 knots and the ship is running at 10 knots, the amount of shift will be 40%. The formula for determining shift amount is as shown below. Ship's speed X 0.
2. RADAR OPERATION 2.17 Using the Offset EBL The offset EBL can be used to predict a potential collision course, and can also be used to measure the range and bearing between two targets. 2.17.1 Predicting a collision course The procedure below may be used to check if a radar target is on a collision course with your vessel. 1. Press the [EBL/VRM] key to show the EBL/VRM soft keys. 2. Press the EBL1 ON soft key to turn on the EBL1. 3. Press the OFFSET soft key.
2. RADAR OPERATION 2.17.2 Measuring range & bearing between two targets The procedure which follows shows how to measure the range and bearing between two targets, using the targets “A” and “B” in the figure below as an example. 1. 2. 3. 4. 5. 6. 7. 8. 9. Operate the cursor pad to place the cursor on the target “A”. Press the [EBL/VRM] key to show the EBL/VRM soft keys. Press the EBL1 ON soft key to turn on the EBL1. Press the OFFSET soft key.
2. RADAR OPERATION 2.18 Echo Trails Echo trails are simulated afterglow of target echoes that represent their past movements relative to own ship. This function is useful for alerting you past possible collision situations. Echo trail Sample echo trails 2.18.1 Trail time 1. If not displayed, press the [HIDE/SHOW] key to show the radar soft keys. 2. Press the TARGET soft key. 3. Press the TRAIL soft key. .250/SP.125nm H-UP 319.9°M TRAIL .250/SP.125nm H-UP 319.
2. RADAR OPERATION 5. Use the cursor pad to select time desired. 6. Press the ENTER soft key to finish. 2.18.2 Starting echo trails 1. 2. 3. 4. If not displayed, press the [HIDE/SHOW] key to display the radar soft keys. Press the TARGET and TRAIL soft keys. Press the TRAIL ON/OFF to select ON. Press the RETURN soft key twice to finish. “TRAIL,” the echo trail time selected and elapsed time appear at the top right-hand corner of the display. Then, afterglow starts extending from all targets.
2. RADAR OPERATION 2.18.5 Trail color (MODEL1722C series) The MODEL1722C series may be shown echo trails in blue, yellow, green or white. 1. If not displayed, press the [HIDE/SHOW] key to display the radar soft keys. 2. Press the TARGET, TRAIL and TRAIL COLOR soft keys. TRAIL COLOR ▲ ¤ BLUE ¡ YELLOW ¡ GREEN ¡ WHITE ▼ Trail color window 3. Use the cursor pad to select the color desired. 4. Press the ENTER soft key. 5. Press the RETURN soft key twice to finish.
2. RADAR OPERATION 2.19 Echo Stretch Normally, the reflected echoes from long range targets appear on the display as weaker and smaller blips even though they are compensated by the radar’s internal circuitry. The echo stretch function magnifies these small blips in all ranges. Two types of echo stretch are available: ES LOW which stretches echoes in bearing direction and ES HIGH which stretches them in both range and bearing directions.
2. RADAR OPERATION 2.20 Echo Averaging The echo average feature, available with selection of a Model 1833/C series network radar as radar source, effectively suppresses sea clutter. Echoes received from stable targets such as ships appear on the screen at almost the same position during every rotation of the antenna. On the other hand, unstable echoes such as sea clutter appear at random positions. To distinguish real target echoes from sea clutter, echo average performs scan-to-scan correlation.
2. RADAR OPERATION 2.21 Outputting TLL Data Target position data can be output to units of the network and shown on their plotter screen, with the TTL mark ( X ). This function requires position and heading data. 1. If not displayed, press the [HIDE/SHOW] key to display the radar soft keys. 2. Operate the cursor pad to place the cursor on the target whose position you wish to output. 3. Press the TARGET soft key. .250/SP.125nm H-UP 319.
2. RADAR OPERATION 2.22 Guard Alarm The guard alarm allows the operator to set the desired range and bearing for a guard zone. When ships, islands, landmasses, etc. violate the guard zone, an audio alarm sounds and the offending target blinks to call the operator’s attention. CAUTION • The alarm should not be relied upon as the sole means for detecting possible collision situations.
2. RADAR OPERATION The equipment then searches for targets inside the guard zone to determine the guard alarm type. If a target is found inside the guard zone the guard zone type becomes an “Outward guard alarm”, and any target exiting, the guard zone will trigger an alarm. If no target is found the guard zone type becomes an “Inward guard alarm”, and any targets entering the guard zone will trigger the alarm. The guard alarm type is shown as G1(G2) IN or G1(G2) OUT.
2. RADAR OPERATION 2.23 Watchman 2.23.1 How watchman works The watchman function periodically transmits radar pulses for one minute to check for targets in a guard zone. If a target is found in the zone, watchman is cancelled, the audio alarm sounds and the radar continues transmitting. If no target is found the radar goes into standby, for the number of minutes selected on the RADAR DISPLAY SETUP menu.
2. RADAR OPERATION 2.24 Waypoint Marker A waypoint marker, showing waypoint position output from a navigation device, may be inscribed on the radar display. You may show or hide this marker as desired. .250/SP.125nm H-UP Waypoint marker 319.9°M NAV + W. MAN ON/OFF FUNC WPT MK ON /OFF RETURN 359.9°R 0.24nm + Waypoint marker 1. 2. 3. 4. If not displayed, press the [HIDE/SHOW] key to display the radar soft keys. Press the NAV FUNC soft key.
2. RADAR OPERATION 2.25 ARP (option), TTM operation When the radar source is ARP-equipped Model 1833/C series network radar, you can manually and automatically acquire and track 10 targets. Once a target is acquired automatically or manually it is automatically tracked within 0.1 to 32 nm. When the FURUNO heading sensor PG-1000 is connected, RMC sentence (NMEA) is required for true heading data.
2. RADAR OPERATION 2.25.1 Activating/deactivating ARP, TTM 1. Press the [MENU] key followed by the ARP SETUP soft key to show the ARP SETUP menu. ARP TARGET INFO INTERNAL ARP CANCEL ALL TARGETS NO ARP VECTOR MODE TRUE ARP VECTOR TIME 30 minutes HISTORY INTERVAL OFF CPA OFF TCPA 30 seconds AUTO ACQUISITION AREA OFF TARGET ID NUMBER OFF ARP SETUP EDIT RETURN ARP setup menu 2. Select ARP TARGET INFO, and then press the EDIT soft key to show the ARP target info window.
2. RADAR OPERATION 2.25.2 Acquiring and tracking targets (ARP only) Ten targets may be acquired and tracked manually and automatically. When you attempt to acquire an eleventh target, the message “ARP FULL – ALREADY TRACKING 10 TARGETS!” appears for five seconds. To acquire another target, terminate tracking of an unnecessary target as shown in the paragraph 2.25.4. Manual acquisition 1. 2. 3. 4. If not displayed, press the [HIDE/SHOW] key to display the radar soft keys. Press the TARGET soft key.
2. RADAR OPERATION 7. Press the [MENU] key to close the menu. An acquisition area of 2.0 to 2.5 miles in range and ±45º on either side of the heading line in bearing appears. Note: Targets being tracked in automatic acquisition are continuously tracked when switching to manual acquisition. Automatic acquisition area 45° starboard 45° port 2.0 - 2.5 nm Automatic acquisition area 2.25.3 Displaying target number (internal, external ARP) Target number can be shown for ARP and TTM targets as below. .
2. RADAR OPERATION 2.25.4 Terminating tracking of ARP targets When 10 targets have been acquired, no more targets may be acquired unless targets are cancelled. If you need to acquire additional targets, you must first cancel one or more individual targets, or all of the targets, using one of the procedures below. Terminating tracking of selected targets 1. Place the cursor on the target to terminate tracking. 2. Press the [CLEAR] key to erase to terminate tracking and erase the target.
2. RADAR OPERATION 2.25.5 Setting vector attributes (ARP) What is a vector? A vector is a line extending from a tracked target which shows estimated speed and course of the target. The vector tip shows an estimated position of the target after the selected vector time elapses. It can be useful to extend the vector length in order to evaluate the risk of collision with any target.
2. RADAR OPERATION 2.25.6 Displaying past position display (ARP) This ARP can display time-spaced dots (maximum 10 dots) marking the past positions of any targets being tracked. You can evaluate a target’s actions by the spacing between dots. Below are examples of dot spacing and target movement. (a) Ship turning (b) Ship running straight (c) Ship reduced speed (d) Ship increased speed Past position displays To turn the past position display on or off: 1.
2. RADAR OPERATION 2.25.7 ARP, TTM target data This ARP calculates motion trends (range, bearing, course, speed, CPA and TCPA) of all target been tracked. You can show this data for a tracked target as below. TARGET ID NUMBER, in the ARP SETUP menu, must be turned on to show ARP target data. 1. Place the cursor on the target whose data you want to see. 2. If not displayed, press the [HIDE/SHOW] key to display the radar soft keys. 3. Press the TARGET and TARGET INFO soft keys.
2. RADAR OPERATION 2.25.8 CPA/TCPA alarm (ARP) When the predicted CPA of any target becomes smaller than a preset CPA alarm range or its predicted TCPA less than a preset TCPA alarm limit, an audio alarm sounds, which you may silence with the [CLEAR] key. In addition, the target plot symbol of the offending target changes to a triangle and flashes together with its vector. Press the [ALARM] key and the message COLLISION ALARM appears. Press the CLEAR ALARM soft key to acknowledge the alarm.
2. RADAR OPERATION TCPA ▲ ¤ ¡ ¡ ¡ ¡ ¡ ¡ ¡ ▼ 30 seconds 1 minute 2 minutes 3 minutes 4 minutes 5 minutes 6 minutes 12 minutes TCPA window 8. Select a TCPA limit. 9. Press the ENTER soft key. 10. Press the [MENU] key to close the menu. 2.25.9 Lost target alarm (ARP) When the system detects a lost target, the target symbol becomes a diamond and tracking is discontinued after one minute. 1 Lost target mark Canceling a lost target 1. Place the cursor on the target. 2. Press the [CLEAR] key.
2. RADAR OPERATION 2.26 Interpreting the Radar Display 2.26.1 General Minimum and maximum ranges Minimum range The minimum range is defined by the shortest distance at which, using a scale of 1.5 or 0.75 nm, a target having an echoing area of 10 m2 is still shown separate from the point representing the antenna position. It is mainly dependent on the pulselength, antenna height, and signal processing such as main bang suppression and digital quantization.
2. RADAR OPERATION Radar resolution There are two important factors in radar resolution (discrimination): bearing resolution and range resolution. Bearing resolution Bearing resolution is the ability of the radar to display the echoes received from two targets, which are at the same range and close together, as separate targets. Bearing resolution is directly proportional to the antenna length, and inversely proportional to the radar's wavelength.
2. RADAR OPERATION 2.26.2 False echoes Occasionally echo signals appear on the screen at positions where there is no target, or disappear even if there are targets. False target situations may be recognized, however, if you understand why they are displayed. Typical false echoes are shown below. Multiple echoes Multiple echoes occur when a transmitted pulse returns from a solid object like a large ship, bridge, or breakwater.
2. RADAR OPERATION Virtual image A relatively large target close to your ship may be shown at two positions on the screen. One of them is the true echo directly reflected by the target and the other is a false echo which is caused by the mirror effect of a large object on or close to your ship as shown in the figure below. If your ship comes close to a large metal bridge, for example, such a false echo may temporarily be seen on the screen.
2. RADAR OPERATION 2.26.3 SART (Search and Rescue Transponder) A Search and Rescue Transponder (SART) may be triggered by any X-Band (3 cm) radar within a range of approximately 8 nm. Each radar pulse received causes it to transmit a response which is swept repetitively across the complete radar frequency band. When interrogated, it first sweeps rapidly (0.4 µs) through the band before beginning a relatively slow sweep (7.5 µs) through the band back to the starting frequency.
2. RADAR OPERATION General procedure for detecting SART response 1. Use the range scale of 6 or 12 nm as the spacing between the SART responses is about 0.6 nm (1125 m) to distinguish the SART. 2. Turn off the automatic clutter suppression (if applicable). 3. Turn off the Interference Rejector.
2. RADAR OPERATION A/C SEA control For optimum range SART detection, this control should be set to the minimum. Care should be exercised as wanted target in sea clutter may be obscured. Note also that in clutter conditions the first few dots of the SART response may not be detectable, irrespective of the setting of the anti-clutter sea control. In this case, the position of the SART may be estimated by measuring 9.5 nm from the furthest dot back towards own ship.
3. PLOTTER OPERATION 3.1 Plotter Displays You may show the plotter display over the entire screen, in the overlay screen (MODEL1722C series), or in a combination screen. Press the [DISP] key to show the screen selection window, and then rotate the [ENTER] knob to select PLOT, NAV or OVRLY (overlay) as appropriate. 3.1.1 Full-screen plotter display Presentation mode Nav data window (North-up) (Data changes with NAV soft key setting and cursor Trip distance status. For details see next page.) 34° 22.
3. PLOTTER OPERATION Nav data window The data shown in the nav data window depends on the status of the NAV soft key and the cursor. Presentation Mode Latitude and longitude of cursor intersection Latitude, Longitude Bearing to Cursor 34°24. 3456'N + 124°24. 3456'W 359. 9°M 59.9nm Cursor Mark NU TRIP 99.
3. PLOTTER OPERATION 3.1.2 Compass display The compass display, displayed at the bottom half of the screen in the combination display, provides steering information. The compass rose shows two triangles: the black triangle (hollow on monochrome model) shows the bearing to destination waypoint and the red (solid on monochrome) triangle, which moves with ship’s course, shows own ship’s course.
3. PLOTTER OPERATION Reading the XTE (cross-track error) monitor The XTE monitor, located below the compass rose, shows the amount you are off course and the direction to steer to return to course. The own ship marker shows the direction and amount your ship is off course. It is shown in black when the amount of cross-track error is within the XTE monitor range and yellow when it is over. (On the monochrome model it flashes when the amount of cross-track error is more than the XTE monitor range.
3. PLOTTER OPERATION 3.1.3 Highway display The highway display, displayed at the lower half of the screen in the combination display, provides a graphic presentation of ship’s track along intended course. It is useful for monitoring ship’s progress toward a waypoint. The own ship marker shows relation between ship and intended course.
3. PLOTTER OPERATION 3.1.4 Nav data display The nav data display provides comprehensive navigation data. The user may select what data to display and where to display it, on the NAV DATA DISPLAY SETUP menu. For details see paragraph “5.8 Nav Data Display Setup.” Appropriate sensors are required. Bars ( - -) appear when corresponding sensor is not connected. Position TRIP LOG POSITION 34° 34. 5678' N 120° 34. 5678' W WPT POSITION 34° 14. 5678' N 120° 14. 5678' W SOG STW COURSE 10.0 kt BEARING 9.
3. PLOTTER OPERATION 3.2 Presentation Mode Three types of presentation modes are provided for the plotter display: north-up, course-up and auto course-up. To change the presentation mode, first press the [HIDE/SHOW] key if the plotter soft keys are not displayed. Press the MODE soft key to select desired mode. Each press of the key changes the presentation mode and presentation mode indication (top right-hand corner of the screen) cyclically in the sequence of North-up, Course-up and Auto course-up. 3.2.
3. PLOTTER OPERATION 3.2.2 Course-up The destination is at the top of the screen when a destination is set. When no destination is set, the course or heading is at the top of the screen at the moment the course-up mode is selected. A filled triangle marks own ship’s position. Note: The data sentences GGA and VTG must be output from the NavNet display unit connected to the GPS navigator in order to correctly orient the own ship marker in the course-up mode on other NavNet display units. + 34° 22.
3. PLOTTER OPERATION 3.3 Shifting the Display The plotter display can be shifted on the plotter display as below. 1. Press the cursor pad to display the cursor. 2. Locate the cursor at a screen edge and press and hold down the cursor pad. The screen shifts in the direction opposite of cursor location. 3. To automatically return the cursor to the screen center, press the CENTER soft key. This also returns own ship marker to the screen center. 3.
3. PLOTTER OPERATION 3.5 Chart Cards 3.5.1 Chart card overview Your system reads FURUNO and NavCharts™ (NAVIONICS) charts, or C-MAP charts, depending on its specification. When you insert a suitable chart card in the slot and your boat is near any chart graphic data, a chart appears. If a wrong card is inserted or a wrong chart scale is selected, land masses will appear hollow. Insert the proper card and select a suitable chart scale.
3. PLOTTER OPERATION 3.5.2 Indices and chart enlargement When the [RANGE] key is operated, you will see several frames appear on the chart. These frames are called indices and they show you what parts of the chart can be zoomed in on. Sample chart (Japan) showing indices When a chart cannot be displayed A chart will not be displayed in the following conditions: • When the chart scale is too large or too small. • When scrolling the chart outside the indices. • When this happens, select proper chart scale.
3. PLOTTER OPERATION 3.5.3 FURUNO and NavCharts™ Chart symbols The table below shows FURUNO and NavCharts™ mini chart symbols and their meanings. Chart symbols Symbol Symbol Description Description Summit Position of Sounding Wreck Obstruction Lighthouse Fishing Reef Lighted Buoy Platform Buoy Anchorage Radio Station Data for aids to navigation Selected FURUNO and NavCharts™ charts can show buoy and lighthouse data. Simply place the cursor on the lighthouse or buoy mark.
3. PLOTTER OPERATION Port service icons (NavCharts™ only) NavCharts™ show services available at ports, with icons. Use the cursor pad to place the cursor on the sailboat icon (denotes a port or harbor), and then push the [ENTER] knob. The services available appear at the top of the display. Detailed information of service selected List of services at the port selected + 34° 22. 3456'N 080° 22. 3456'E 359.9°M TRIP NU 19.9 kt 99.
3. PLOTTER OPERATION 3.5.4 C-MAP cards Cursor and data display Besides its fundamental functions of providing position data, the cursor can also show caution area, depth area, source of data, etc. on C-map charts. In addition, you can display information about an icon by placing the cursor on it. 1. Press the cursor pad to turn the cursor on. 2. Use the cursor pad to place the cursor on the position desired. 3. Push the [ENTER] knob to open the Objects window.
3. PLOTTER OPERATION Icon data You may place the cursor on any icon to find information about the selected icon. 1. For example, place the cursor on a lighthouse icon. Place the cursor on a lighthouse icon. + 34° 22. 3456'N 080° 22. 3456'E 359.9°M TRIP NU 19.9 kt 99.9 nm 16.0nm MARK ENTRY MODE NTH UP CENTER GO TO CURSOR D. BOX ON /OFF Lighthouse icon 2. Push the [ENTER] knob to show data. For example, the following window appears for a lighthouse.
3. PLOTTER OPERATION Navigation mark, fixed Light. Color white Height 7. 00 Meters Light characteristic occulting XXXXXXXX XXXXXXXX Sample lighthouse data 5. Press the RETURN soft key to close the Objects window. Tide information The C-MAP chart card provides for calculation of the tide heights for any date. Additionally it displays the times of sunrise and sunset. 1. Press the cursor pad to place the cursor on a Tide icon ( 2. Push the [ENTER] knob to open the Objects window. 34 24. 3456 N 359.
3. PLOTTER OPERATION Horizontal Cursor 0.86 t TRIP NU 99.9 nm 0.74 DATE 0.61 0.48 Vertical Cursor 0.35 0 4 8 12 16 20 24 Time: 04:35 Height: 0.45ft Draught: 0.65ft 01/07/30 +13:30 43° 32.860N 010° 18.022E Port info RETURN LIVORNO (LEGHORN) High Water(max) 0.86ft(13:30 L) Low Water(min) 0.35ft(21:00 L) Sunrise 07:52L Sunset 16:53 L Tide window 5. Press the DATE soft key to open the DATE window. CHANGE DATE (DAY. MONTH. YEAR) 01. 01. 2001 LIMIT: 31.12.2099 Date window 6.
3. PLOTTER OPERATION 3.6 Working with Track Your ship’s track is plotted on the screen using navigation data fed from a navigation receiver. This section shows you what you can do with track, from turning it on or off to changing its plotting interval. Own ship’s track is displayed in the default setting and on the color model it is red. 3.6.1 Displaying track Own ship track 1. Press the [MENU] key followed by the CHART SETUP and TRACKS & MARKS CONTROL soft keys to open the TRACK CONTROL menu.
3. PLOTTER OPERATION Target track Target track, NMEA format TTM data sentence (target data fed from an ARP board-equipped MODEL1833/1833C series network radar), may be turned on or off as desired. The default setting is ON. 1. Press the [MENU] key followed by the CHART SETUP and TRACKS & MARKS CONTROL soft keys to open the TRACK CONTROL menu. 2. Use the cursor pad to select TARGET TRACK DISPLAY. 3. Press the EDIT soft key to show the target track display window. 4.
3. PLOTTER OPERATION 3.6.3 Changing track color (MODEL1722C series) Track can be displayed in red (default setting), yellow, green, light-blue, purple, blue and white. It can be useful to change track color on a regular basis to discriminate between previous day’s track, etc. Own ship’s track 1. Press the [MENU] key followed by the CHART SETUP and TRACKS & MARKS CONTROL soft keys to open the TRACK CONTROL menu. 2. Use the cursor pad to select OWN SHIP TRACK COLOR. 3.
3. PLOTTER OPERATION 3.6.4 Track plotting method and interval for own ship track In drawing the own ship track, first the ship’s position fed from a navigation receiver is stored into the unit’s memory at an interval of time or distance. A shorter interval provides for better reconstruction of the track, but the storage time of the track is reduced. When the track memory becomes full, the oldest track is erased to make room for the latest.
3. PLOTTER OPERATION 4. Use the [ENTER] knob and the cursor pad to enter numeric data. The [CLEAR] key functions to clear an entire line of data. 5. Push the [ENTER] knob or ENTER soft key. 6. Press the [MENU] key to close the menu. 3.6.5 Changing own ship track/mark distribution setting The equipment stores a total of 8000 points of track and marks. This amount may be distributed as desired, and the default setting is 2000 points of track and 6000 marks.
3. PLOTTER OPERATION 3.6.6 Erasing track This paragraph shows you how to erase own ship’s track and target tracks. You can erase ship’s track three ways: collectively, by color (color model only) and by area. Erasing own ship track by area You can erase own ship’s track by area as below. This function is not available on the overlay display (MODEL1722C series). 1. Press the [MENU] key followed by the CHART SETUP, TRACKS & MARKS CONTROL and ERASE T & M soft keys to show the ERASE menu.
3. PLOTTER OPERATION Erasing own ship track by color (color model) You may erase own ship’s track by color as follows: 1. Press the [MENU] key followed by the CHART SETUP, TRACKS & MARKS CONTROL and ERASE T & M soft keys to show the ERASE menu. 2. Use the cursor pad to select ERASE TRACKS BY COLOR and press the EDIT soft key. ERASE TRK BY COLOR ▲ ¤ RED ¡ YELLOW ¡ GREEN ¡ LIGHT BLUE ¡ PURPLE ¡ BLUE ¡ WHITE ▼ Erase track by color window 3.
3. PLOTTER OPERATION 3.7 Marks, Lines Marks are useful for denoting important points such as a good fishing spot. Marks can be inscribed in seven shapes and seven colors (MODEL1722C series): Red, yellow, green, light-blue, purple, blue and white. ¡ ✕ Mark shapes 3.7.1 Entering a mark 1. Place the cursor on the location where you want a mark to appear. 2. Press the MARK ENTRY soft key. (Press the [HIDE/SHOW] key if the plotter soft keys are not shown.
3. PLOTTER OPERATION 4. Select MARKS SHAPE and press the EDIT soft key. MARK SHAPE ▲ ¤ ¡ ¡ ¡ ¡ ✕ ¡ ¡ ¡ ▼ Mark shape window 5. Use the cursor pad to select mark shape desired and then press the RETURN soft key. 6. Select MARKS SIZE and press the EDIT soft key. 7. Use the cursor pad to select LARGE (default setting) or SMALL as appropriate. 8. Press [ENTER] knob or ENTER soft key. 9. Press the [MENU] key twice to close the menu. 3.7.
3. PLOTTER OPERATION LINES STYLE ▲ ¤ ¡ ¡ ¡ - - - - ▼ Mark line window 3. Use the cursor pad to select line style desired and press the ENTER soft key. Line style “dot” disables line drawing. The joint between lines is determined by mark shape. For example, selecting the circle shape will join lines with a circle as below. 4. Press the [MENU] key to close the menu. 3.7.4 Erasing marks, lines Erasing an individual mark 1. Operate the cursor pad to place the cursor on the mark you want to erase. 2.
3. PLOTTER OPERATION Erasing all marks, lines You can erase all marks and lines. Be absolutely sure you want to erase all marks and lines - erased marks and lines cannot be restored. 1. Press the [MENU] key followed by the CHART SETUP, TRACKS & MARKS CONTROL and ERASE T & M soft keys to show the ERASE menu. 2. Use the cursor pad to select ERASE ALL MARKS/LINES and press the EDIT soft key. 3. Push the [ENTER] knob to erase all marks and lines. 4. Press the [MENU] key twice to close the menu.
3. PLOTTER OPERATION 3.8 Waypoints In navigation terminology, a waypoint is a particular location on a voyage whether it be a starting, intermediate or destination point. A waypoint is the simplest piece of information your equipment requires to get you to a destination, in the shortest distance possible. This unit has 999 waypoints into which you can enter position information.
3. PLOTTER OPERATION 7. Press the MARK SHAPE soft key to open the mark shape selection window. SELECT MARK Waypoint mark shape selection window 8. Operate the cursor pad to select shape desired. 9. Press the ENTER soft key. 10. For the MODEL1722C series, press the SELECT MARK and MARK COLOR soft keys in that order to open the waypoint mark color selection window. Select color desired and press the ENTER soft key.
3. PLOTTER OPERATION 12. Press the SAVE soft key to register the waypoint. 13. Enter another waypoint with the cursor, or press the [MENU] key to close the menu. Entering a waypoint by range and bearing This method is useful when you want to enter a waypoint using range and bearing to a target found on a radar. 1. Press the [MENU] key to open the menu. 2. Press the WAYPOINTS/ROUTES, WAYPOINTS and WAYPOINT BY RNG & BRG soft keys. 3.
3. PLOTTER OPERATION Entering a waypoint from the waypoint list You can manually enter waypoint position from the waypoint list as follows: 1. Press the [MENU] key to open the menu. 2. Press the WAYPOINTS/ROUTES and WAYPOINTS soft keys. 3. Press the LOCAL LIST (lists waypoints in order from nearest to furthest) or ALPHANUMERIC LIST (lists waypoints in alphanumeric order) soft key. 35°47.010'N 135°21.000'W 350.9° 3.80 nm CRAB 00:00 01JAN01 34°42.000'N 135°21.050'W 050.9° 1.
3. PLOTTER OPERATION 7. Press the SAVE soft key. 8. Press the [MENU] key to close the menu. Editing a waypoint from the plotter display You may change edit waypoints from the plotter display as follows: 1. Press the [MENU] key followed by the WAYPOINTS/ROUTES and WAYPOINTS soft key to open the waypoint menu. 2. Press the WAYPOINT BY CURSOR soft key. 3. Operate the cursor pad to place the cursor on the waypoint which you want to change.
3. PLOTTER OPERATION 3.8.3 Erasing waypoints Erasing a waypoint with the cursor 1. Press the cursor pad to turn on the cursor. 2. Operate the cursor pad to place the cursor on the waypoint you want to erase. A flashing diamond mark appears over the waypoint when the waypoint is correctly selected. 3. Press the [CLEAR] key. You are asked if you are sure to erase the waypoint. 4. Push the [ENTER] knob. The waypoint is erased from both the plotter screen (if it is currently displayed) and the waypoint list.
3. PLOTTER OPERATION 3.8.4 Changing waypoint mark size (FURUNO, NavCharts™) You may change the size of all waypoint marks to small or large (default), or you may turn them off. 1. Press the [MENU] key to open the menu. 2. Press the CHART SETUP and CHART DETAILS soft keys.
3. PLOTTER OPERATION 3.8.5 Searching waypoints You can search for a waypoint through the alphanumeric list as follows: 1. Press the [MENU] key. 2. Press the WAYPOINTS/ROUTES, WAYPOINTS and ALPHANUMERIC LIST soft keys to show the alphanumeric list. ▲ ▲ ABALONE 00:00 01JAN01 35°47.010'N 135°21.000'W 350.9° 3.80 nm CRAB 00:00 01JAN01 34°42.000'N 135°21.050'W 050.9° 1.98 nm FISH 00:00 01JAN01 34°41.000'N 135°21.030'W 065.9° 1.83 nm LOBSTER 00:00 01JAN01 38°44.300'N 135°21.010'W 144.9° 4.
3. PLOTTER OPERATION 3.9 Routes Often a trip from one place to another involves several course changes, requiring a series of route points (waypoints) which you navigate to, one after another. The sequence of waypoints leading to the ultimate destination is called a route. Your unit can automatically advance to the next waypoint on a route, so you do not have to change the destination waypoint repeatedly. You can store up to 200 routes, and a route may have 35 waypoints. 3.9.
3. PLOTTER OPERATION 5. If desired you can change the route name shown and/or add a comment. A route name may consist of six characters; comment, 13 characters. 6. Press the LOCAL LIST or ALPHA LIST soft key to open the waypoint list. 7. Use the cursor pad to select a waypoint, and press the ADD WPT soft key to add it to the route. 8. Repeat step 7 to complete the route. Note: To clear a waypoint, press the ERASE LST WP soft key. Each pressing of this key deletes the last waypoint entered. 9.
3. PLOTTER OPERATION Creating voyage-based routes You can create routes based on your ship’s track, and each route may contain 35 points. The route can be created automatically (by time or distance), or manually. This feature is useful when you wish to retrace previous track. The “SAVE” icon appears at the top of the screen when a voyage-based route is being created. 1. Press the [MENU] key to open the menu. 2. Press the WAYPOINTS/ROUTES soft key. 3. Press the CREATE VOYAGE-BASED ROUTE soft key.
3. PLOTTER OPERATION 6. Choose how to record points for your route, by time, by distance or manual entry pressing by one of BCKTRK TIME, BCKTRK RANGE or MANUAL soft key as appropriate. For manual go to step 8. For BCKTRK TIME, BCKTRK DIST one of the following displays appears. TIME INTERVAL DISTANCE INTERVAL 00h01m (When selecting BCKTRK TIME.) 00.1nm (When selecting BCKTRK DIST.) Displays for entry of time, distance interval 7. Enter interval desired with the cursor pad and press the [ENTER] knob.
3. PLOTTER OPERATION 3.9.2 Connecting routes Two routes which you have created can be connected as follows to form a new route. 1. 2. 3. 4. 5. 6. 7. Press the [MENU] key to open the menu. Press the WAYPOINTS/ROUTES soft key. Press the ROUTES soft key. Press the NEW ROUTE soft key. If desired, enter the name for the new route and enter comment. Press the CONNECT soft key. Use the cursor pad and the [ENTER] knob to enter the route name for the first route, beneath FIRST in the CONNECT ROUTE window.
3. PLOTTER OPERATION 3.9.3 Inserting waypoints Waypoints can be inserted into a route as follows: Inserting waypoint from the route list 1. 2. 3. 4. 5. 6. Press the [MENU] key to open the menu. Press the WAYPOINTS/ROUTES soft key. Press the ROUTES soft key. Use the cursor pad to select a route. Press the EDIT ROUTE soft key. The route name screen appears. Press the LOCAL LIST soft key. EDIT ROUTE ROUTE NAME: 001 COMMENT: 01 001WPT 34°44.111'N 135°21.134'W LEG ▲ 29.9° 12.0nm 02 003WPT 34°43.
3. PLOTTER OPERATION 9. Use the cursor pad to select the waypoint you want to insert. (You can switch between the local list and alphanumeric list by using the LOCAL LIST and ALPHA LIST soft keys.) 10. Press the SELECT WPT or CHANGE WPT soft key, whichever is displayed. 11. Press the [MENU] key to close the menu. Inserting a waypoint from the plotter display Inserting a waypoint before first or last waypoint in a route 1. 2. 3. 4. 5. 6. 7. Press the [MENU] key to open the menu.
3. PLOTTER OPERATION 3.9.4 Removing waypoints from a route Removing a waypoint from the route list 1. 2. 3. 4. 5. 6. 7. 8. Press the [MENU] key to open the menu. Press the WAYPOINTS/ROUTES soft key. Press the ROUTES soft key. Select a route. Press the EDIT ROUTE and LOCAL LIST soft keys. Select the waypoint you want to remove. Press the REMOVE WPT soft key. Press the [MENU] key to close the menu. Removing a waypoint from the plotter display 1. 2. 3. 4. 5. 6. 7. Press the [MENU] key to open the menu.
3. PLOTTER OPERATION 3.10 Navigation This section shows you how to get to a desired destination by “quick points,” waypoints, port services and routes. Note: Reciprocal setting and canceling of destination is available by outputting the data sentence ZDA from the NavNet unit connected to the navigator. 3.10.1 Navigating to a “quick point” The “quick point” feature allows you to navigate to point(s) without retaining the data indefinitely in your unit’s memory.
3. PLOTTER OPERATION Navigating to multiple quick points 1. Select “35 POINTS” following the procedure in “Selecting quick point entry method” on the previous page. 2. Press the GOTO soft key. 3. Place the cursor on an existing waypoint (SELECT WPT soft key appears) or a new location (ADD QP soft key appears). 4. Depending on the action taken at step 3 press the SELECT WPT or ADD QP soft key. “QP<01>” appears at the cursor location if a quick point is selected.
3. PLOTTER OPERATION 3.10.3 Navigating to ports, port services (NavCharts™ only) Some NavCharts™ have a port service list which shows services available at ports or harbors. (See page 3-13.) You can use the list to set destination as follows: 1. Select “35 PTS/PORT SVC” following the procedure in “Selecting quick point entry method” on page 3-45. 2. Press the GOTO soft key. Then, soft key titles change as in the figure below. + 40°45.971'N 13°57.462'E FROM OS 0.26 nm 180.2°M 16.
3. PLOTTER OPERATION 4. If you selected PORT at step 3, use the cursor pad to select a port and press the ENTER soft key. Make a route using the soft keys and push the [ENTER] knob. (If you want to go directly to that port, simply press the ADD QP soft key followed by the [ENTER] knob.) If you selected NEAR SRVC at step 3, select service mark desired and then push the ENTER soft key or [ENTER] knob. Then, the display shows the locations of those services nearest you.
3. PLOTTER OPERATION 3.10.4 Following a route Selecting the route to follow 1. 2. 3. 4. 5. Press the [MENU] key to open the menu. Press the WAYPOINTS/ROUTES soft key. Press the ROUTES soft key to open the route list. Select a route. Press the GOTO soft key to show the plotter display. The cursor is on the route waypoint nearest own ship. WPT FROM OS FISH GOTO 1.3 nm 208.5°M ROUTE 16.0 nm WP-002 GOTO WPT FISH RVRSE ROUTE WP-001 RETURN CRAB Plotter display, route selected as destination 6.
3. PLOTTER OPERATION Restarting navigation When you steer to avoid an obstacle or the vessel drifts, you may go off your intended course, as in Line 1 in the figure below. Also, if you don’t need to return to the original course, you can go directly to the next waypoint, as in Line 2 in the figure below. In these cases, use the restart function to restart navigation. Line 2 Obstacle Line 1 Original course Example of when to restart navigation 1. Press the [MENU] key to open the menu. 2.
3. PLOTTER OPERATION Setting speed for ETA calculation Speed, which may be input manually or automatically, is required to calculate ETA (Estimated Time of Arrival) to a waypoint. 1. 2. 3. 4. Press the [MENU] key to open the menu. Press the WAYPOINTS/ROUTES soft key. Press the LOG soft key. Press the SPEED soft key. SPEED FOR ETA ▲ ¤ SPD 010.0kt ¡ GPS AVG. SPEED ▼ Select speed for ETA window 5. Key in speed manually in the SPD field, or use GPS speed data (if applicable) by selecting GPS AVG. SPEED. 6.
3. PLOTTER OPERATION To select waypoint switching method do the following: 1. 2. 3. 4. 5. Press the [MENU] key. Press the PLOTTER SETUP soft key. Use the cursor pad to select WAYPOINT SWITCHING. Press the EDIT soft key to show the waypoint switching window. Use the cursor pad to select appropriate waypoint switching method; PERPENDICULAR, ARRVL ALM CRCL (default setting), or MANUAL. 6. Press the ENTER soft key or [ENTER] knob. 7. Press the [MENU] key to close the menu. Canceling route navigation 1. 2. 3.
3. PLOTTER OPERATION 3.11 Alarms When an alarm setting has been violated the buzzer sounds and the speaker icon appears (in red on the 1722C series). Press the [CLEAR] key to silence the alarm. You can see which alarm has been violated on the alarm menu display. You may set up the plotter alarms on the ALARM menu, which may be displayed by pressing the [ALARM] key.
3. PLOTTER OPERATION 3.11.2 Arrival alarm The arrival alarm informs you that your boat is approaching a destination waypoint. The area that defines an arrival zone is that of a circle which you approach from the outside of the circle. The alarm will be released if your boat enters the circle. When the arrival alarm is active a dashed circle (red on the MODEL1722C series) marks the arrival alarm area. Note: Arrival alarm and anchor watch alarm cannot be set together.
3. PLOTTER OPERATION 3.11.3 Anchor watch alarm The anchor watch alarm informs you that your boat is moving when it should be at rest. When the anchor watch is active, a dashed circle (red on the MODEL1722C series) with an “X” at its center marks the anchor watch area. Alarm setting Your ship's position where you start the anchor watch alarm. : Alarm area How the anchor watch alarm works 1. Press the [ALARM] key to open the alarm menu. 2. Use the cursor pad to select ANCHOR WATCH ALARM. 3.
3. PLOTTER OPERATION 3.11.4 XTE (Cross Track Error) alarm The XTE alarm warns you when your boat is off its intended course. When the XTE alarm is active two dashed lines (red on the MODEL1722C series) mark the XTE alarm area. Own ship position Alarm setting Destination waypoint Intended course : Alarm How the XTE alarm works 1. Press the [ALARM] key to open the alarm menu. 2. Use the cursor pad to select XTE ALARM. 3. Press the EDIT soft key to open the XTE alarm window. XTE ALARM ▲ ¡ ON 0.
3. PLOTTER OPERATION 4. Use the cursor pad to select WITHIN, OVER/UNDER, or OFF. 5. For WITHIN and OVER/UNDER, use the cursor pad and [ENTER] knob to enter alarm range: Use ◄ or ► to select digit; rotate the [ENTER] knob to set value. 6. Press the ENTER soft key or push the [ENTER] knob to register setting. 7. Press the [ALARM] key to close the menu. 3.11.
3. PLOTTER OPERATION 3.11.7 Trip alarm The trip alarm informs you when you traveled a certain distance. 1. Press the [ALARM] key to open the alarm menu. 2. Use the cursor pad to select TRIP ALARM. 3. Press the EDIT soft key to show the trip alarm window. TRIP ALARM ▲ ¡ ON 0000.0nm ¤ OFF ▼ Trip alarm window 4. Select ON with the cursor. 5. Use the cursor pad and [ENTER] knob to enter alarm range: Use ◄ or ► to select digit; rotate the [ENTER] knob to set value. 6.
3. PLOTTER OPERATION 3.11.8 Alarm information When an alarm setting has been violated the buzzer sounds and the speaker icon appears (in red on the color model). Press the [CLEAR] key to silence the alarm. You can see which alarm has been violated on the alarm menu display. In the example below the arrival alarm has been violated. 1. Press the [ALARM] key. The name of the offending alarm appears in the ALARM INFORMATION window. AUDIO ALARM INT & EXT BUZZ ARRIVAL ALARM ON 0.010nm ANCHOR WATCH ALARM OFF 0.
3. PLOTTER OPERATION Alarm messages The table below shows the plotter alarm messages and their meanings Plotter alarm messages and their meanings Message ARRIVED AT XXX WAYPOINT! (XXX = waypoint number) ENTERED INTO AVOIDANCE AREA! EXCEEDED ANCHOR WATCH LIMIT! EXCEEDED XTE LIMIT! SPEED ALARM! TEMPERATURE ALARM! TRIP ALARM! MILEAGE EXCEEDED 3.12 Meaning Arrival alarm violated. Proximity alarm violated. Anchor watch alarm violated. XTE alarm violated. Speed alarm violated. Water temperature alarm violated.
3. PLOTTER OPERATION 3.13 Entering the MOB Mark, Setting MOB as Destination The MOB (Man Overboard) mark functions to mark man overboard position. You can inscribe this mark from any mode, except while playing back data or conducting a self-test. Note that this function requires position data. MOB mark M (MOB) Range, bearing Man overboad Current position M 162.5° O B 0.49 nm MOB Data Box Bearing and range to MOB position MOB concept 1.
4. VIDEO SOUNDER OPERATION With connection of the optional network sounder you can show video sounder images on the display. 4.1 Principle of Operation The video sounder determines the distance between its transducer and underwater objects such as fish, lake bottom or seabed and displays the results on screen. It does this by utilizing the fact that an ultrasonic wave transmitted through water travels at a nearly constant speed of 4800 feet (1500 meters) per second.
4. VIDEO SOUNDER OPERATION 4.2 Sounder Displays 4.2.1 Selecting a sounder display There are seven display modes from which to choose: dual frequency, single frequency, marker zoom, bottom zoom, bottom lock, bottom discrimination, and A-scope To select a display; 1. Press the [DISP] key and select a sounder display. 2. If not displayed, press the [HIDE/SHOW] key to show the sounder soft keys. 3. Press the DISPLY MODE soft key to show the display mode window.
4. VIDEO SOUNDER OPERATION 4.2.2 Description of sounder displays Single frequency display Display mode Variable Range Marker (white) Depth scale Minute marker 0'30" Zero line Icons (alarm, battery, simulation) 0 S I SOUNDER SINGLE M F SHIFT 50 52 Color bar Fish echo 40 Temp. scale (orange) 50 Cross-hair cursor 100 30 AUTO/ D. BOX FREQ 50 /200 DISPLY MODE Water temp. graph Water temp.
4. VIDEO SOUNDER OPERATION Dual-frequency display The dual-frequency display provides both 50 kHz and 200 kHz pictures. This display is useful for comparing the same picture with two different sounding frequencies. 0.0 50k 200k Dual-frequency display 50 kHz picture The sounder uses ultrasonic pulses to detect bottom conditions. The lower the frequency of the pulse, the wider the detection area. Therefore, the 50 kHz frequency is useful for general detection and judging bottom condition.
4. VIDEO SOUNDER OPERATION Marker-zoom display The marker-zoom display expands a selected area of the normal sounder picture to full vertical size of the screen on the left-half window. You may specify the portion to expand by operating the VRM (Variable Range Marker), which you can shift with the [ENTER] knob. The area between the VRM and zoom marker is expanded. The length of the segment is equal to one division of the depth scale. Fish school 0'20" 0 42 Fish school 44 42.
4. VIDEO SOUNDER OPERATION Bottom-lock display The bottom-lock display provides a compressed normal picture on the right half of the screen and a 3 or 6 meter (10 or 20 feet) wide layer in contact with the bottom is expanded onto the left half of the screen. This mode is useful for discriminating bottom fish from the bottom echo. You may select the bottom lock range from the SOUNDER RANGE SETUP menu. For details, see paragraph 5.9.3. 0 20 15 This part is zoomed.
4. VIDEO SOUNDER OPERATION A-scope display (display only) The A-scope display, available in all modes, shows echoes at each transmission with amplitudes and tone proportional to their intensities, on the right 1/3 of the screen. It is useful for estimating fish species and seabed composition. To turn on the A-scope display, press the DISPLAY MODE soft key, select display mode desired, then press the A-SCPE soft key to turn the A-scope display on or off as appropriate.
4. VIDEO SOUNDER OPERATION 4.3 Automatic Sounder Operation Automatic sounder operation is useful when you are preoccupied with other tasks and do not have the time to adjust the display. 4.3.1 How the automatic sounder works The automatic sounder function automatically selects the proper gain, range scale and clutter suppression level according to depth. It works as follows: • Range changes automatically to locate the bottom on the lower half of screen.
4. VIDEO SOUNDER OPERATION 4.4 Manual Sounder Operation Manual operation is useful for observing fish schools and bottom using fixed gain setting. The gain, range and range shifting functions used together give you the means to select the depth you can see on screen. The basic range can be thought of as providing a “window” into the water column and range shifting as moving the “window” to the desired depth. 4.4.1 Selecting the manual mode 1. 2. 3. 4. 4.4.
4. VIDEO SOUNDER OPERATION Press the [GAIN] key to show the gain window, and rotate the [ENTER] knob to set the gain. Current level is shown on the bar. Press the RETURN key to finish. The setting range is 0-100 (%). GAIN 200kHz ▲ 27 HIGH LOW ▼ Gain window Note 1: On the dual-frequency display, the gain can be independently set for 50 kHz and 200 kHz. Use the FREQ 50/200 soft key to select the frequency for which to adjust gain. Note 2: Gain cannot be adjusted in the automatic sounder mode.
4. VIDEO SOUNDER OPERATION 4.5 Measuring Depth, Time The VRM functions to measure the depth, and the time cursor measures time. 1. Rotate the [ENTER] knob to shift the VRM; counterclockwise the shift it downward, clockwise to shift it upward. You may also use the cursor pad to shift the VRM, in which case use ▲ or ▼. 2. Use ◄ or ► on the cursor pad to shift the cross-hair cursor to measure time. Time to cursor intersection (Max. 99'59") Depth to VRM 0'33" 0 28.
4. VIDEO SOUNDER OPERATION 4.6 Reducing Interference Interference from other acoustic equipment operating nearby or other electronic equipment on your boat may show itself on the display as shown below. Interference from other sounder Electrical inteference Types of interference To reduce interference, do the following: 1. Press the [MENU] key. 2. Press the SOUNDER MENU soft key. 3. Select NOISE LIMITER and press the EDIT soft key to show the noise limiter window.
4. VIDEO SOUNDER OPERATION 4.7 Reducing Low Level Noise Dots (light-blue on the color model) may appear over most of the screen. This is mainly due to sediment in the water or noise. This noise can be suppressed by adjusting CLUTTER on the SOIUNDER menu. Appearance of clutter When the sounder mode is Auto, the clutter suppression setting is fixed at AUTO. To reduce low level noise in manual sounder operation do the following: 1. Press the [MENU] key. 2. Press the SOUNDER MENU soft key. 3.
4. VIDEO SOUNDER OPERATION 4.8 Erasing Weak Echoes Sediment in the water or reflections from plankton may be painted on the display in green or light blue (color display) or “spots” on the background (monochrome display). These weak echoes may be erased as below. Weak echoes Appearance of weak echoes 1. Press the [MENU] key. 2. Press the SOUNDER MENU soft key. 3. Select SIGNAL LEVEL, and press the EDIT soft key to show the signal level window.
4. VIDEO SOUNDER OPERATION 4.9 White Marker (MODEL1722C series) The white marker functions to display a particular echo color in white. For example, you may want to display the bottom echo in white to discriminate fish echoes near the bottom. Note that the bottom must be displayed in reddish-brown (color in default hue setting) for the white marker to function. 1. Press the [MENU] key. 2. Press the SOUNDER MENU soft key. 3. Select WHITE MARKER, and press the EDIT soft key to open the white marker window.
4. VIDEO SOUNDER OPERATION 4.10 Picture Advance Speed The picture advance speed determines how quickly the vertical scan lines run across the screen. When selecting a picture advance speed, keep in mind that a fast advance speed will expand the size of the fish school horizontally on the screen and a slow advance speed will contract it. The advancement speed may be set independent of ship’s speed or synchronized with ship’s speed. 4.10.1 Advancement independent of ship’s speed 1. Press the [MENU] key.
4. VIDEO SOUNDER OPERATION 4.10.2 Advancement synchronized with ship’s speed With speed data provided by a speed measuring device, picture advance speed may be automatically synchronized with ship’s speed. As shown in the figure below the horizontal scale of the display is not influenced with the speed dependent picture advance mode active, thus it permits judgement of fish school size and abundance at any speed.
4. VIDEO SOUNDER OPERATION 4.11 Display Colors (MODEL1722C series) You can select the number of colors and background color to display as follows: 1. Press the [MENU] key. 2. Press the SOUNDER MENU soft key. 3. Select HUE, and then press the EDIT soft key to show the hue window. HUE ▲ 1 ▼ Hue window 4. Use the cursor pad to select hue number, referring to the table below. (You can see the result of your selection on the display.) Hue no. and background and echo colors Hue No.
4. VIDEO SOUNDER OPERATION 4.12 Alarms The sounder section has five conditions which generate visual and aural alarms: bottom alarm, fish alarm (bottom lock), fish alarm (normal), water temperature alarm (temperature sensor required), and speed alarm. For 1722C series, note that the alarm icon is red when an alarm setting is violated, and changes to background color when the [CLEAR] key or CLEAR ALARM soft key is pressed. The color does not change when another alarm is violated.
4. VIDEO SOUNDER OPERATION 4.12.2 Bottom alarm The bottom alarm sounds when the bottom echo is within the alarm range set. To activate the bottom alarm the depth must be displayed. Note that the bottom alarm is turned on or off reciprocally with the bottom alarm on the plotter alarm menu. 1. Press the [ALARM] key to show the ALARM menu. 2. Use the cursor pad to select BOTTOM ALARM. 3. Press the EDIT soft key to show the bottom alarm window. BOTTOM ALARM ▲ ¡ ON 0000.0-0000.
4. VIDEO SOUNDER OPERATION 4.12.4 Fish alarm (B/L) The bottom-lock fish alarm sounds when a fish echo is within a predetermined distance from the bottom. Note that the sensitivity of the fish alarm can be set on the SOUNDER SYSTEM SETUP menu. 1. Press the [ALARM] key to show the ALARM menu. 2. Use the cursor pad to select FISH ALARM (B/L). 3. Press the EDIT soft key to show the fish alarm (B/L) window. FISH ALARM (B/L) ▲ ¡ ON 0000.0-0000.0 ft ¤ OFF ▼ Fish alarm (B/L) window 4.
4. VIDEO SOUNDER OPERATION 4.12.5 Water temperature alarm There are two types of water temperature alarms: WITHIN RANGE and OUT OF RANGE. The WITHIN RANGE alarm sounds when the water temperature is within the range set, the OUT OF RANGE alarm sounds when the water temperature is higher or lower than the range set. This alarm requires water temperature data. Note that the water temperature alarm is turned on or off reciprocally with the water temperature alarm on the plotter alarm menu. 1.
4. VIDEO SOUNDER OPERATION 4.12.6 When an alarm setting is violated... When an alarm setting has been violated the buzzer sounds and the speaker icon appears (in red on the color model). Press the [CLEAR] key to silence the alarm. You can see which alarm has been violated on the alarm menu display. In the example below the arrival alarm has been violated. To see which alarm(s) has been violated; 1. Press the [ALARM] key. The offending alarm is shown in the ALARM INFORMATION window.
4. VIDEO SOUNDER OPERATION Alarm messages The table below shows the sounder alarm messages and their meanings Sounder alarm messages and their meanings Message DEPTH ALARM! FISH ALARM! TEMPERATURE ALARM! 4.13 Meaning Bottom alarm violated. Fish alarm violated. Water temperature alarm violated. Water Temperature Graph The water temperature graph (appropriate sensor required) plots water temperature on the sounder display. (See the figure on page 4-3.) It can be turned on or off as below. 1. 2. 3. 4. 5.
4. VIDEO SOUNDER OPERATION 4.14 Interpreting the Sounder Display 4.14.1 Zero line The zero line (sometimes referred to as the transmission line) represents the transducer’s position, and moves off the screen when a deep phased range is used. Zero line Shift Zero line 4.14.
4. VIDEO SOUNDER OPERATION 4.14.3 Fish school echoes Fish school echoes will generally be plotted between the zero line and the bottom. Usually the fish school/fish echo is weaker than the bottom echo because its reflection property is much smaller compared to the bottom. The size of the fish school can be ascertained from the density of the display. Size of fish school Small school Large school Fish school echoes 4.14.
5. CUSTOMIZING YOUR UNIT This chapter describes the various options which allow you to set up your unit to suit your needs. For mode specific menus, e.g. radar plotter and sounder, make sure that you select the appropriate display when making changes or viewing menu option. 5.1 General Setup This paragraph shows you how to set up functions common to the plotter, radar and sounder displays. This is done on the GENERAL SETUP menu, which you may display from any mode.
5. CUSTOMIZING YOUR UNIT Contents of general menu Item Key Beep Language Description Turns key operation beep on/off. Chooses menu language. Range Unit Chooses unit of range and speed measurement. Temperature Unit Depth Unit Temperature Source Depth Source Reset Trip Log Lat/Lon Display Chooses unit of water temperature measurement. Chooses unit of depth measurement. Chooses source of water temperature data. Chooses source of depth data. Resets distance run.
5. CUSTOMIZING YOUR UNIT 5.2 Radar Setup This paragraph explains how to customize the radar display to suit your operational needs. Be sure to show the radar display before executing any of the procedures. 5.2.1 Radar display setup The radar display may be set up from the RADAR DISPLAY SETUP menu, which contains items such as EBL reference and cursor position format. 1. Show the radar display, and press the [MENU] key to show the main menu. 2. Press the RADAR DISPLAY SETUP soft key.
5. CUSTOMIZING YOUR UNIT Contents of radar setting menu Item Description Settings EBL Reference References EBL bearing, shown in the EBL data box, to North (True) or heading (Relative) True, Relative (True only for north-up, course-up and true motion mode) Relative Cursor Position Chooses how to display cursor position. LAT/LON: Lat/Long position of cursor TD: Loran C or Decca TDs RNG & BRG-REL: Range and bearing referenced to ship’s heading RNG & BRG-TRUE Range and bearing referenced to North.
5. CUSTOMIZING YOUR UNIT Contents of radar setting menu (con’t from previous page) Item Description Settings Default Setting Echo Color (Color model) Chooses echo color. Yellow, Green, Multi (Echoes shown in red, yellow or green in order of descending strength.) Green Watchman Time Sets watchman stand-by period. For further details see paragraph 2.23 Watchman. 5, 10, 20 min 5 min Range Unit Sets unit of range measurement.
5. CUSTOMIZING YOUR UNIT 5.2.2 Radar range setup You may choose the radar ranges you wish to use, from the RADAR RANGE SETUP menu. (Available ranges depends on the network radar used.) After choosing the ranges desired change the range with the [RANGE] key to activate range settings. At least two ranges (excluding maximum range) must be turned on. When less than two ranges are turned on, you cannot escape from the range setup menu.
5. CUSTOMIZING YOUR UNIT Function key setup The function keys provide one-touch call up of a desired function. The default radar function key settings are as shown in the table below. Function Key 1 2 3 4 5 Default Function Turn heading line off. Turn range rings on/off. Turn echo trail on/off. Turn display offcenter on/off. Select radar source. Function Key Label HL RNG TRL SFT RSR If the above settings are not to your liking you may change them as follows: 1. Press the [MENU] key. 2.
5. CUSTOMIZING YOUR UNIT 4. Select function desired with the cursor pad or [ENTER] knob and press the ENTER soft key or [ENTER] knob to register your selection. 5. Press the [MENU] key to close the menu. Radar function keys Menu Item Function Function Key Label OFF Assigns no function. — HL: HDG LINE OFF Turns heading line off. HL MOD: MODE Selects presentation mode. MOD GAI: GAIN Shows gain sensitivity adjustment window. GAI SEA: A/C SEA Shows manual or A/C SEA adjustment window.
5. CUSTOMIZING YOUR UNIT 5.3 Plotter Setup This paragraph provides the information necessary for setting up the plotter display. 5.3.1 Navigation options Navigation options, for example, waypoint switching method, may be set on the plotter setup menu. 1. Show the plotter display and press the [MENU] key open the main menu. 2. Press the PLOTTER SETUP soft key. WAYPOINT SWITCHING ARRVL ALM CRCL COURSE VECTOR LINE SET GOTO METHOD 1POINT PLOTTER SETUP EDIT D.
5. CUSTOMIZING YOUR UNIT 5.3.2 Function key setup The function keys provide one-touch call up of a desired function. The default plotter function key settings are as shown in the table below. Function Key 1 2 3 4 5 Default Function Start/stop recording/plotting own ship’s track. Edit mark/line. Ruler (measure range and bearing between two points). Add new waypoint. Alphanumeric waypoint list.
5. CUSTOMIZING YOUR UNIT 4. Select function desired with the cursor pad or [ENTER] knob and press the ENTER soft key or [ENTER] knob to register your selection. 5. Press the RETURN soft key. 6. Press the [MENU] key to close the menu. Plotter function keys M enu Item Function Function Key Label OFF Assigns no function. — ADD: ADD NEW WPT Registers waypoint at cursor position. Place cursor for waypoint location then press function key.
5. CUSTOMIZING YOUR UNIT 5.4 Chart Setup This paragraph shows you how to setup digital charts, from offsetting chart position to turning chart attributes on or off. 5.4.1 Chart offset In some instances position may be off by a few seconds. For example, the position of the ship is shown to be at sea while it is in fact moored at a pier. You can compensate for this error by offsetting chart position as shown in the procedure below. You can execute the procedure from any display mode. 1.
5. CUSTOMIZING YOUR UNIT 5.4.2 FURUNO, Nav-Charts™ chart attributes Charts attributes may be turned on or off from the CHART DETAILS menu, which you may display as follows: 1. Press the [MENU] key. 2. Press the CHART SETUP and CHART DETAILS soft keys.
5. CUSTOMIZING YOUR UNIT Contents of chart details menu (FURUNO, NavCharts) Item Description Lat/Lon Grid Settings Default Setting Settings MODEL1722C series Default Setting MODEL1722 series Red, yellow, green, light-blue, purple, blue, white.
5. CUSTOMIZING YOUR UNIT CNTOUR LINE soft key 1. Press the [MENU] key. 2. Press the CHART SETUP and CHART DETAILS soft keys. 3. Press the CNTOUR LINE soft key. DEPTH < 10m RED DEPTH = 10m YELLOW DEPTH > 10m LIGHT BLUE DEPTH INFORMATION RED CNTOUR LINE EDIT 10m: APPROX. 30ft OR 5fa OR 6pb CNTOUR LINE DEPTH < 10m ON DEPTH = 10m ON DEPTH > 10m ON DEPTH INFORMATION ON EDIT 10m: APPROX.
5. CUSTOMIZING YOUR UNIT 5.4.3 C-MAP chart attributes Charts attributes may be turned on or off from the CHART DETAILS menu, which you may display as follows: 1. Press the [MENU] key. 2. Press the CHART SETUP and CHART DETAILS soft keys.
5.
5.
5. CUSTOMIZING YOUR UNIT DEPTH INFO soft key 1. Press the [MENU] key. 2. Press the CHART SETUP and CHART DETAILS soft keys. 3. Press the DEPTH INFO soft key.
5. CUSTOMIZING YOUR UNIT 5.5 Data Boxes Setup You may select the data to show in the data boxes for the plotter, radar and sounder displays. Six boxes may be displayed in case of small size data box and two for large size data box. 1. Display the plotter, radar or sounder display, whichever you want to set. 2. Press the [MENU] key to open the main menu. 3. Press one of the following sets of soft keys depending on the display selected at step 1. Radar mode: RADAR DISPLAY SETUP, D.
5. CUSTOMIZING YOUR UNIT 5.6 Hot Page Setup Five user-arrangeable hot pages are provided for quick selection of desired display. 1. Press the [MENU] key followed by pressing the SYSTEM CONFIGURATION, SYSTEM SETUP, HOT PAGE & NAV DISP SETUP and HOT PAGE SETUP soft keys in that order. HOT PAGE 1 HOT PAGE 2 HOT PAGE 3 HOT PAGE 4 HOT PAGE 5 Hot page setup menu 2. Use the cursor pad to select the hot page number to set and then press the EDIT soft key. The full-screen selection window appears.
5. CUSTOMIZING YOUR UNIT 3. Rotate the [ENTER] knob to select the full-screen picture desired and push the [ENTER] knob. A set of combination screens, corresponding to the full-screen selected, appears. HOT PAGE 1 10 20 ----- Combination screen selection window 4. Rotate the [ENTER] knob to select the full screen or combination screen desired and push it to set.
5. CUSTOMIZING YOUR UNIT 5.7 Navigator Setup This section provides the information necessary for selecting the type of navigator connected to your plotter. 5.7.1 Navigation data source The NAV SETUP menu mainly selects the source of nav data. For GPS receiver other than the GP-310B, speed averaging and local time offset (to use local time) are also available. Press the [MENU] key followed by the SYSTEM CONFIGURATION, NAV OPTION and NAV SOURCE SETTINGS soft keys to display this menu.
5. CUSTOMIZING YOUR UNIT 5.7.2 GPS receiver setup (Set equipped with GP-310B) The GPS SETUP menu sets up the GPS Receiver GPS-310B. Press the [MENU] key followed by the SYSTEM CONFIGURATION, NAV OPTION and GPS SENSOR SETTINGS soft keys to display this menu. LOCAL TIME OFFSET +00:00 GEODETIC DATUM WGS-84 POSITION SMOOTHING 000 second(s) SPD/CSE SMOOTHING 005 second(s) GPS SPEED AVERAGING 060 second(s) LATITUDE OFFSET 0.000’N LONGITUDE OFFSET 0.000’E DISABLE SATELLITE __ __ __ LATITUDE 38 00.
5. CUSTOMIZING YOUR UNIT Contents of GPS sensor setup menu (con’t from previous page) Item Spd/Cse Smoothing GPS Speed Averaging Latitude, Longitude Offset Disable Satellite Latitude Longitude Antenna Height GPS Fix Mode Cold Start GPS STATUS (soft key) Description Settings Default Setting During position fixing, ship’s velocity (speed and 5 sec 0-999 sec course) is directly measured by receiving GPS satellite signals.
5. CUSTOMIZING YOUR UNIT 5.7.3 TD display setup The TD SETUP menu sets which Loran C or Decca chain to use to display TD position. (Connection of a Loran C or Decca navigator is not necessary to display TD position.) 1. Press the [MENU] key. 2. Press the SYSTEM CONFIGURATION, NAV OPTION and TD SETUP soft keys to display the TD SETUP menu. TD LORAN-C SETUP GRI 9940:11-27 U.S. WEST COAST CORRECTION 1 +000.0 µs CORRECTION 2 +000.0 µs DECCA CHAIN 01 R-G S BALTIC CORRECTION 1 +00.00 lane CORRECTION 2 +00.
5. CUSTOMIZING YOUR UNIT 5. Press the ENTER soft key to register your selection. 6. If necessary, you may enter a position offset to refine Loran C position accuracy. Select (GRI) CORRECTION 1 or CORRECTION 2 and press the EDIT soft key. Enter correction value with the cursor pad and [ENTER] knob and then press the ENTER soft key or the [ENTER] knob. Use the +<− −>soft key to switch from plus to minus and vice versa. 7. Press the RETURN soft key twice. 8. Press the GENERAL SETUP soft key. 9.
5. CUSTOMIZING YOUR UNIT 5.8 Nav Data Display Setup The nav data display provides various navigation data, fed from a navigator, network equipment, etc. You may select the data to display and where to display it, on the NAV DATA menu. 1. Press the [MENU] key to open the main menu. 2. Press the SYSTEM CONFIGURATION, SYSTEM SETUP, HOT PAGE & NAV DISP SETUP and NAV DATA DISPLAY SETUP soft keys.
5. CUSTOMIZING YOUR UNIT 5.9 Sounder Setup This section shows you how to customize your sounder to your liking. You can set fish alarm sensitivity, fine tune sensor data, etc. 5.9.1 System setup 1. Show the sounder display and press the [MENU] key. 2. Press the SOUNDER SYSTEM SETUP soft key.
5. CUSTOMIZING YOUR UNIT Sounder system setup menu description (con’t) Item 5-30 Description Settings Default Setting TVG (50 kHz, 200kHz) TVG (Time Varied Gain) compensates for propagation attenuation of the ultrasonic waves. It does this by equalizing echo presentation so that fish schools of the same size appear in the same density in both shallow and deep waters. In addition, it reduces surface noise. Note that if the TVG level is set too high short range echoes may not be displayed.
5. CUSTOMIZING YOUR UNIT 5.9.2 Sensor setup The sensor setup menu lets you further refine speed, temperature and depth data fed from the network sounder. 1. Show the sounder display and press the [MENU] key. 2. Press the SOUNDER SYSTEM SETUP and SENSOR SETUP soft keys to show the SENSOR SETUP menu. The current ship’s speed, water temperature, depth and speed of sound are shown at the bottom of the menu. SPEED CALIBRATION + 00% TEMP CALIBRATION + 0°F DEPTH CALIBRATION +0.
5. CUSTOMIZING YOUR UNIT 5.9.3 Sounding range, zoom range, bottom lock range This paragraph shows you how to set custom ranges for basic range, zoom range (marker and bottom zoom) and bottom lock range. All default basic ranges are restored whenever the unit of depth measurement is changed. Therefore, change the depth unit before changing the basic ranges. 1. Show the sounder display and press the [MENU] key to open the main menu. 2.
5. CUSTOMIZING YOUR UNIT Function key setup The function keys provide one-touch call up of a desired function. The default sounder function key settings are as shown in the table below. Function Key 1 2 3 4 5 Default Function Output cursor position Suppress clutter. Erase weak signal. Suppress noise. Set picture advancement speed. Function Key Label TLL CLT SLV NL PA If the above settings are not to your liking you may change them as follows: 1. Show the sounder display. 2. Press the [MENU] key. 3.
5. CUSTOMIZING YOUR UNIT 5. Select function desired with the cursor pad or [ENTER] knob and press the ENTER soft key or [ENTER] knob to register your selection. 6. Press the ENTER soft key or the [ENTER] knob to register your selection. 7. Press the [MENU] key to close the menu. Sounder function keys M enu Item Function Function Key Label OFF Assigns no function. MOD: AUTO MODE Display automatic mode selection window. MOD G20: GAIN 200 KHZ Displays 200 kHz gain adjustment window.
6. DATA TRANSFER 6. DATA TRANSFER This chapter provides information for saving and replaying data to and from memory cards, and uploading and downloading data. 6.1 Memory Card Operations The memory cards function to store data, and the following data can be saved: • Marks/lines • Waypoints/routes • Track • Setting data 6.1.1 Formatting memory cards Before you can use a memory card it must be formatted. This prepares the card for use with the system.
6. DATA TRANSFER 6.1.2 Saving data to a memory card 1. Insert a formatted memory card into the slot. 2. Press the [MENU] key followed by the CONFIGURATION, DATA TRANSFER, UPLOAD/DOWNLOAD DATA and SAVE DATA TO MEMORY CARD soft keys to show the SAVE DATA menu. ▲ TRACKS OFF MARKS & LINES OFF WAYPOINTS & ROUTES OFF SETTING DATA* OFF SAVE DATA EDIT SAVE FORMAT RETURN * = Plotter data only Save data menu 3. 4. 5. 6. 7. 8. Use the cursor pad to select item to save. Press the EDIT soft key.
6. DATA TRANSFER Memory card messages Various memory card messages appear to alert you to memory card-related error. These are tabulated below. Memory card messages Message Reason Remedy Memory card is not inserted. Please insert card. Push ENTER knob to continue. Memory card not inserted. Push the [ENTER] knob to return to the SAVE DATA display and then insert card. Memory card is not formatted. Push ENTER knob to continue. Unformatted memory card.
6. DATA TRANSFER 6.1.3 Playing back data from a memory card Data (track, marks, lines, waypoints, routes and setting data) can be loaded from a memory card and displayed on the screen. This feature is useful for observing past data and setting up the equipment for a specific purpose with “setup data.” 1. Press the [MENU] key followed by the SYSTEM CONFIGURATION and DATA TRANSFER soft keys. 2. Press the UPLOAD/DOWNLOAD DATA soft key. 3.
6. DATA TRANSFER 6.2 Uploading, Downloading Data You can upload waypoint and route data from a PC and download like data to a PC, through the DATA 3 port at the rear of the display unit. Note that sounder and radar data cannot be uploaded or downloaded. 6.2.
6. DATA TRANSFER 7. To change the baud rate, press the SELECT BPS soft key. BAUD RATE ▲ ¤ ¡ ¡ 4800 bps 9600 bps 19200 bps ▼ Baud rate window 8. Select baud rate and press the ENTER soft key. Note: Select the speed among 4800, 9600 and 19200 bps. 9. Press the DWLOAD or UPLOAD soft key. You are asked if you are ready to download or upload waypoints and routes. 10. Push the [ENTER] knob to download or upload data. Waypoint data format PFEC, GPwpl, llll.llll, a, yyyyy.
6. DATA TRANSFER Route data menu $PFEC, GPrtc, xx, c----c 1 2 Route data format 1: Number of sentences required for one complete route data (1 to 4). See Note 2. 2: Number of sentences currently used (1 to 4) 3: Message mode (Always set to C) 4: Route No. (001 to 300, 3 digits required) 5 through 12: Waypoint name (Max. 8 names, length of each waypoint name is fixed to 7 byte) Note 2: A route can may contain 35 waypoints, and the GPRTE sentence for one route data may exceed 80 byte limitation.
6. DATA TRANSFER 6.3 Loading Waypoint Data from Yeoman Waypoint data can be loaded from a Yeoman to this equipment. Connect the Yeoman to any DATA port on this equipment and then follow the procedure below. 1. 2. 3. 4. 5. Press the [MENU] key. Press the SYSTEM CONFIGURATION key. Press the DATA TRANSFER soft key. Press the RECEIVE YEOMAN DATA soft key. You are asked if you are sure to receive waypoint data from Yeoman equipment. Push the [ENTER] knob to receive the data.
6. DATA TRANSFER 6.4 Receiving Data Via Network Equipment You can receive waypoints, routes, marks and lines from NavNet equipment. 1. 2. 3. 4. Press the [MENU] key. Press the SYSTEM CONFIGURATION soft key. Press the DATA TRANSFER soft key. Press the RECEIVE DATA VIA NETWORK soft key. HOST NAME RECEIVE DATA - - - - - - - - MARKS & LINES OFF WAYPOINTS & ROUTES OFF EDIT RCV RETURN Receive data menu 5. Select HOST NAME and press the EDIT soft key. HOST NAME ------- Host name window 6.
6. DATA TRANSFER 10. Press the RCV soft key to receive data. The message “NOW RECEIVING DATA.” is displayed. IF no data could be found the message “(HOST NAME)’ IS NOT FOUND.” appears. 11. When the transfer is completed, the message “DATA TRANSFER COMPLETED. PUSH ENTER KNOB TO CONTINUE.” appears. Push the [ENTER] knob. 12. Press the [MENU] key to close the menu. 6.5 Outputting Data Through the Network Follow the procedure below to output data through the network. 1. Press the [MENU] key to open the menu.
7. MAINTENANCE, TROUBLESHOOTING This chapter provides information necessary for keeping your unit in good working order and remedying simple problems. WARNING Do not open the equipment. Hazardous voltage which can cause electrical shock exists inside the equipment. Only qualified personnel should work inside the equipment. 7.1 Preventive Maintenance Regular maintenance is important for optimum performance. A maintenance schedule should be established and should at least include the items below.
7. MAINTENANCE, TROUBLESHOOTING 7.2 Replacement of Fuse The fuse on the power cable protects the equipment from reverse polarity of the ship’s mains and equipment fault. If the fuse blows, find out the cause before replacing it. Use the correct fuse (10A for 12 V, 5A for 24 V). Using the wrong fuse will damage the equipment and void the warranty. CAUTION Use the proper fuse. Use of a wrong fuse can cause fire or damage the equipment. 7.
7. MAINTENANCE, TROUBLESHOOTING 7.4 Simple Troubleshooting This section provides simple troubleshooting procedures which the user can follow to restore normal operation. If you cannot restore normal operation do not attempt to check inside the unit. Any trouble should be referred to a qualified technician. 7.4.1 General General troubleshooting If… you cannot turn on the power there is no response when a key is pressed Then… ! check for blown fuse. ! check that the power connector is firmly fastened.
7. MAINTENANCE, TROUBLESHOOTING 7.4.2 Radar Requires a network radar.
7. MAINTENANCE, TROUBLESHOOTING 7.4.3 Plotter Requires GPS Receiver GP-310B. Plotter troubleshooting If… position is not fixed within three minutes position is wrong track is not plotted bearing is wrong Loran C (or Decca) TDs do not appear Loran C TDs are wrong ship’s speed indication is not zero after the ship is stopped Then… ! check that antenna connector is firmly fastened. ! Check the satellites numbers received, on the GPS status display (GPS SENSOR SETTINGS menu, GPS STATUS key see page 7-11).
7. MAINTENANCE, TROUBLESHOOTING 7.4.4 Sounder Requires Network Sounder ETR-6/10N.
7. MAINTENANCE, TROUBLESHOOTING 7.5 Diagnostics This paragraph provides the procedures for testing the equipment for proper operation. Four tests are provided: Memory I/O test, Keyboard test, Remote controller test, and Test pattern. 7.5.1 Memory I/O test The memory I/O test provides for individual testing of the display unit, GPS receiver GP-310B, network sounder ETR-6/10N and ARP, displaying program number and checking for proper operation. 1. 2. 3. 4. 5. Press the [MENU] key to show the menu.
7. MAINTENANCE, TROUBLESHOOTING Display unit test Press the DISPLAY UNIT TEST soft key at the MEMORY I/O TEST menu to test the display unit. The equipment displays program version number, checks devices and shows the number of the chart card inserted in the chart slot (if inserted). Results for device checks are shown as OK or NG (No Good). For any NG, request service. Test connector required to check ports. “- -“ appears when no test connector is no connected.
7. MAINTENANCE, TROUBLESHOOTING Network sounder (ETR-6/10N) test Press the NETWORK SOUNDER TEST soft key at the MEMORY I/O TEST menu to test the Network Sounder ETR-6/10N. The equipment displays network sounder program version number, checks the ROM and RAM, and displays water temperature (appropriate sensor required) and depth. The results of the ROM and RAM check are shown as OK or NG (No Good). For NG request service. Press the RETURN soft key to return to the MEMORY I/O TEST menu. PROGRAM No.
7. MAINTENANCE, TROUBLESHOOTING 7.5.2 Test pattern The test pattern test checks the display for proper display of colors (MODEL1722C series) or tones (MODEL1722 series). 1. 2. 3. 4. 5. Press the [MENU] key to show the menu. Press the SYSTEM CONFIGURATION soft key. Press the SYSTEM SETUP soft key. Press the TEST & CLEAR soft key. Press the TEST PATTERN soft key to show test pattern. BLACK BLUE GREEN GREEN RED RETURN WHITE RETURN PRESS ENTER KNOB TO CHANGE PATTERN. PUSH ENTER KNOB TO CHANGE PATTERN.
7. MAINTENANCE, TROUBLESHOOTING 7.5.3 Keyboard, remote controller test The keyboard test checks the controls on the display unit and remote controller for proper operation. 1. 2. 3. 4. 5. Press the [MENU] key to show the menu. Press the SYSTEM CONFIGURATION soft key. Press the SYSTEM SETUP soft key. Press the TEST & CLEAR soft key. Press the KEYBOARD & REMOTE TEST soft key.
7. MAINTENANCE, TROUBLESHOOTING 7.6 GPS Status Display The GPS status display provides data about the GPS satellites, and is available with connection of the GPS Receiver GP-310B or a GPS navigator outputting the data sentence GSA or GSV. 1. Press the [MENU] key. 2. Press SYSTEM CONFIGURATION, NAV OPTION and GPS SENSOR SETTINGS soft keys to display the GPS SENSOR SETTINGS menu. 3. Press the GPS STATUS soft key.
7. MAINTENANCE, TROUBLESHOOTING 7.7 Clearing Memories Your equipment has a memory for each of the plotter, radar and sounder sections. These memories can be cleared to restore the unit to default settings. The following data are not cleared: Heading adjustment, timing adjustment, MBS level, tuning point, tuning indication (short, medium, long), video level, dead sector, antenna height, STC curve, antenna type, on time, TX time. 1. 2. 3. 4. 5. Press the [MENU] key to open the menu.
7. MAINTENANCE, TROUBLESHOOTING 7.8 Error Messages In addition to alarm message your equipment also displays equipment status menus. Equipment status error messages Error Message Meaning Connection with the ETR was cut. Network sounder disconnected. Connection with the RADAR was cut. Radar disconnected. Low Voltage! Internal Battery Voltage of battery on circuit board in display unit is low. No bearing pulse detected. No bearing pulse from radar antenna. Check antenna cable.
APPENDIX Menu Overview MENU key Radar MENU Key RADAR DISPLAY SETUP RADAR RANGE SETUP ARP SETUP (Requires ARP circuit board in network radar 1833/1833C series.
APPENDIX Plotter CHART SETUP MENU Key 1 AP-2 CHART OFFSET (offsets chart position.) 2 * = Denotes MODEL1722C series only. TRACKS & MARKS CONTROL OWN SHIP TRACK DISP (ON, OFF) OWN SHIP TRACK COLOR (RED, YEL, GRN, L-BLU, PPL, BLU, WHT)* TARGET TRACK DISPLAY (ON, OFF) TARGET TRACK COLOR (RED, YEL, GRN, L-BLU, PPL, BLU, WHT)* INTERVAL (TIME, DISTANCE) TIME INTERVAL (0 - 99m59s, 0m 10s) DISTANCE INTERVAL (0 - 99.99nm/km/sm, 0.
APPENDIX 1 2 (Continued from previous page) CHART DETAILS (C-MAP chart) Page 1 Page 2 * = Denotes MODEL1722C series only. For MODEL 1722 series, ON and OFF.
APPENDIX 1 WAYPOINTS/ ROUTES FUNCTION KEY SETUP* WAYPOINTS LOCAL LIST ALPHANUMERIC LIST WAYPOINT BY CURSOR WAYPOINT BY RNG & BRG ROUTES GO TO soft key NEW ROUTE soft key EDIT ROUTE soft key ERASE ROUTE soft key LOG RESTART soft key RVRSE soft key SPEED soft key COORD TYPE soft key CREATE VOYAGEBASED ROUTE NEW soft key SELECT ROUTE soft key (BCKTRK TIME, BCKTRK DIST, MANUAL) SOFTKEY 1 - SOFTKEY 5 (OFF, ADD NEW WPT, MOVE WPT, RULER, GO TO WPT, GO TO ROUTE, EDIT MK/LINE, TRACK ON/OFF, TTM ON/OFF, DE
APPENDIX Sounder MENU Key SOUNDER SETUP * = MODEL1722C series only NOISE LIMITER (OFF, LOW, MEDIUM, HIGH) CLUTTER (0 - 16(9), AUTO) WHITE MARKER (OFF, 1-8 (8-color), 1-16 (16 color))* ZOOM MARKER (ON, OFF) SL1-SL2: Monochrome HUE (1-9, 1)* SL1-SL3: 8 color SIGNAL LEVEL (OFF, SL1, SL2, SL3, SL4, SL5, SL6) SL1-SL6: 16 color PICTURE ADVANCE (2/1, 1/1, 1/2, 1/4, 1/8, 1/16, STOP) TEMPERATURE GRAPH (ON, OFF) SPD SENSING PIC ADV (ON, OFF) D. BOX soft key (Same items as on plotter menu.
APPENDIX System configuration MENU key SYSTEM CONFIGURATION KEY BEEP (ON, OFF) LANGUAGE (ENGLISH, others) RANGE UNIT GENERAL SETUP (nm, kt; km, km/h; sm, mph; nm&yd, kt; nm&m, kt; km&m, km/h; sm&yd, mph) Page 1 TEMPERATURE UNIT (°C, °F) DEPTH UNIT (m, ft, fa, PB) TEMPERATURE SOURCE (ETR, NMEA) DEPTH SOURCE (ETR, NMEA) RESET TRIP LOG (Yes, NO) LAT/LON DISPLAY (DD° MM. MM , DD° MM. MMM DD° MM. MMMM DD° MM SS.
APPENDIX 3 4 GPS SENSOR SETTINGS LOCAL TIME OFFSET (-13:00-+13:30, +0:00) GEODETIC DATUM (WGS-84, WGS-72, OTHER) POSITION SMOOTHING (0 - 999 sec, 0 sec) SPD/CSE SMOOTHING (0 - 999 sec 5 sec) GPS SPEED AVERAGING (0 - 9999 sec, 60 sec) LATITUDE OFFSET (0 - 9.9999 , 0 N) LONGITUDE OFFSET (0 - 9.9999, 0 E) DISABLE SATELLITE (Max. 3) LATITUDE (45 35.000’ N) LONGITUDE (125 00.
APPENDIX 3 SYSTEM SETUP GPS/NMEA PORT (DATA 1) PORT SETUP FURUNO GPS SENSOR (YES, NO) OUTPUT FORMAT (NMEA0183 Ver.1.5, 2.0) LAT/LON FORMAT (DD MM. MM DD MM. MMM DD MM. MMMM ) OUTPUT DESTINATION (YES, NO) SELECT SNTNC (soft key) *1 PC/NMEA EXT. BUZZ PORT (DATA 3) NMEA OUTPUT FORMAT (NMEA Ver.1.5, 2.
APPENDIX 3 5 6 OUTPUT THROUGH NETWORK TEST & CLEAR MEMORY I/O TEST AAM, APB, BOD, BWR, DBT, DPT, GGA, GLL, GTD, MTW, RMA, RMB, RMC, VHW, VTG, WPL, XTE, ZDA, HDT, HDG, MWV Chooses data sentences to output to NavNet equipment. DISPLAY UNIT TEST GPS SENSOR TEST* NETWORK NETWORK SOUNDER TEST** ARP TEST*** KEY BOARD & REMOTE TEST (Tests keyboard and remote controller.) TEST PATTERN (Displays test pattern.
APPENDIX 3 DATA TRANSFER UPLOAD/ DOWNLOAD DATA DOWNLOAD WPT/ROUTE TO PC (WAYPOINTS & ROUTES ON, OFF, MARKS & LINES ON, OFF) UPLOAD WPT/ROUTE FROM PC (WAYPOINTS & ROUTES ON, OFF, MARKS & LINES ON, OFF) SAVE DATA TO MEMORY CARD (TRACKS ON, OFF , MARKS & LINES ON, OFF, WAYPOINTS & ROUTES ON, OFF, SETTING DATA ON, OFF) LOAD DATA IN MEMORY CARD (TRACK ON, OFF, MARKS & LINES ON, OFF, WAYPOINTS & ROUTES ON, OFF, SETTING DATA ON, OFF) RECEIVE YEOMAN DATA (Receives waypoint data from Yeoman.
APPENDIX ALARM key ALARM key AUDIO ALARM (INT & EXT BUZZ, INTERNAL BUZZ, OFF) ARRIVAL ALARM (ON, OFF, default range: 0.010 nm(km/sm)) ANCHOR WATCH ALARM (ON, OFF, default range: 0.010 nm(km/sm)) PROXIMITY ALARM (ON, OFF) Plotter Alarms XTE ALARM (ON, OFF, default range: 0.050 nm(km/sm)) SPEED ALARM (WITHIN, UNDER/OVER, OFF) TRIP ALARM (ON, OFF) BOTTOM ALARM (ON, OFF) TEMPERATURE ALARM (WITHIN RANGE, OUT OF RANGE, OFF) NEXT INFO (Shows which alarms have been violated.
APPENDIX Geodetic Chart List 001: WGS84 002: WGS72 003: TOKYO : Mean Value (Japan, Korea, and Okinawa) 004: NORTH AMERICAN 1927 : Mean Value (CONUS) 005: EUROPEAN 1950 : Mean Value 006: AUSTRALIAN GEODETIC 1984 : Australia and Tasmania Island 007: ADINDAN : Mean Value (Ethiopia and Sudan) 008: : Ethiopia 009: : Mall 010: : Senegal 011: : Sudan 012: AFG : Somalia 013: AIN EL ABD 1970 : Bahrain Island 014: ANNA 1 ASTRO 1965 : Cocos Island 015: ARC 1950 : Mean Value 016: : Botswana 017: : Lesotho 018: : Malaw
APPENDIX World Time Chart AP-13
APPENDIX Icons Icon Meaning North marker. Points to North. Correct chart and suitable scale - full chart reliability. Chart overenlarged. Chart card not inserted. Wrong chart card inserted. Chart scale too small. Plotter, sounder alarm setting violated. Track is not being recorded or plotted. Chart offset applied. SA VE Voyage-based route being created. Latitude and longitude position offset applied. SI Simulation mode M Voltage of battery on circuit board in display unit is low.
SPECIFICATIONS OF THE MARINE RADAR MODEL 1722/1732/1742/1762 MODEL 1722C/1732C/1742C/1762C 1. GENERAL 1.1. Indication System M1722/1732/1742/1762 PPI Daylight display, raster scan, 4 tones monochrome LCD M1722C/1732C/1742C/1762C PPI Daylight display, raster scan, color LCD 1.2. Range, Pulse length (PL) & Pulse Repetition Rate (PRR) Range (nm) Pulse length (µs) PRR (Hz approx.) 0.125 to 1.5 0.08 2100 1.5 to 3 0.3 1200 3 to 48* 0.
2.2.7. Sidelobe Attenuation less than -18 dB 2.3. MODEL1742/C: 2.3.1. Radiator Slotted waveguide array 2.3.2. Polarization Horizontal 2.3.3. Antenna Rotation Speed 24 rpm nominal 2.3.4. Radiator Length 60 cm 2.3.5. Horizontal Beamwidth less than 3.5° 2.3.6. Vertical Beamwidth 30° 2.3.7. Sidelobe Attenuation less than -20 dB 2.4. MODEL1762/C: 2.4.1. Radiator Slotted waveguide array 2.4.2. Polarization Horizontal 2.4.3. Antenna Rotation Speed 24 rpm nominal 2.4.4. Radiator Length 100 cm 2.
Effective radar display area: 216 x 216 dots 4.2. Range, Range Ring Interval (RRI), Number of Rings Range (NM) 0.125 0.25 0.5 0.75 1 1.5 2 3 4 6 8 12 16 24 36 48 RRI (NM) 0.0625 0.125 0.125 0.25 0.2 0.5 0.5 1 1 2 2 3 4 6 12 12 5 Number of Rings 2 2 4 3 4 3 4 3 4 3 4 4 4 4 3 4 Maximum range: M1722/C: 24nm, M1732/1742(C): 36nm, M1762/C: 48nm 4.3.
5.7. Track Display Plot interval: by time (1 s to 99 m 59 s) or by distance (0 to 99.9 nm) 5.8. Colors Red, yellow, green purple, light-blue, blue, white 5.9. Memory Capacity Track/mark: 8000 points, Waypoint: 999 points 5.10. Storage Capacity Simple route: 200 routes with 35 waypoints each 5.11. MOB 1 point 5.12. Quick Routes 1 course with 35 waypoints max. 5.13. Electronic Chart FURUNO chart card or NAVIONICS chart card available C-MAP chart card also available for C-MAP NT Model 5.14.
M1722/1732 (C) N9.5 (upper), 2.5PB3.5/10 (lower) M1742/1762 (C) N9.5 9. COMPASS SAFE DISTANCE 9.1. Display Unit M1722/1732/1742/1762 Standard: 0.70 m Steering: 0.50 m M1722C/1732C/1741C/1762C Standard: 0.65 m Steering: 0.45 m 9.2. Scanner Unit M1722/C Standard: 1.25 m Steering: 0.85 m M1732/C Standard: 1.40 m Steering: 1.10 m M1742/C Standard: 2.10 m Steering: 1.60 m M1762/C Standard: 1.00 m Steering: 0.
INDEX A AUTO S.SPD soft key .................................2-21 AUTO/D. BOX soft key .................................4-8 A/C RAIN .......................................................2-5 B A/C SEA..........................................................2-4 ACQ soft key ................................................2-35 Battery replacement......................................7-2 ALARM key Bearing measurement by EBL ...................2-15 radar................................................
INDEX Colors (Color model) echoes (radar) ............................................ 5-5 Colors (MODEL1722C series) echoes (sounder)...................................... 4-18 Compass display............................................ 3-3 EBL/VRM key ..................2-14, 2-15, 2-22, 2-23 Echo averaging............................................ 2-28 Echo offset (sounder) .................................. 5-30 Echo stretch.................................................
INDEX Guard alarm erasing by area........................................ 3-27 cancelling..................................................2-31 erasing individual ................................... 3-27 setting ......................................................2-30 shape........................................................ 3-25 H Heading line ................................................2-17 Head-up mode..............................................2-10 Highway display......................
INDEX O following .................................................. 3-49 inserting waypoint from plotter display 3-43 Offset EBL ................................................... 2-22 inserting waypoint from route list......... 3-42 OFFSET soft key ................................2-22, 2-23 removing waypoint from ........................ 3-44 P Picture advance speed ................................ 4-16 PLOTTER SETUP menu ..............................
INDEX color..........................................................3-20 displaying other targets' .........................3-19 displaying own ship's ..............................3-18 erasing all own ship's..............................3-24 erasing all targets' ..................................3-24 erasing own ship's by area......................3-23 erasing own ship's by color .....................3-24 memory distribution setting...................3-22 plotting interval ................................