Users Manual Part 2

1. INSTALLATION
1-5
1.1.4 How to hoist the antenna unit (FAR-2x18/2x28/2x38)
The antenna unit may be assembled before hoisting it to the mounting platform. Attach
lifting belt slings to the “Radiator Bracket”, NOT the antenna radiator, as shown in the
figure below.
Also, hoist the antenna unit slowly
. Hoisting swiftly may cause a damage to the anten-
na radiator or damage the radiator chassis.
There are two methods to hoist the antenna unit.
Method 1
O-ring
Radiator bracket
Waveguide
Antenna radiator
Hex bolt (M8×40),
8 pcs.
Guide pin
OK
Belt sling
Radiator bracket
Set belt slings to
radiator bracket.