Users Manual Part 2

1. INSTALLATION
1-7
Method 2
Fasten one belt sling to both shackles, and pass the other belt sling around the stern
side of the radiator.
1.1.6 How to fasten the antenna unit to the mounting platform (FAR-
2x18/2x28/2x38)
1. Construct a suitable mounting platform referring to the outline drawing at the end
of this manual.
Note: The mounting platform must be flat, level and firmly secured.
• The diameter of the mast for fixing the antenna unit platform must be over 180
mm.
• The thickness of the antenna unit platform must be over 12 mm.
• The reinforcement rib must be installed diagonally.
2. Referring to the outline drawing at the back of this manual, drill four mounting
holes (15 mm) in the mounting platform.
Belt sling
Lifting Fixture
Shackle
Bow side of the
antenna unit
Note: Pass the belt
sling around the
stern side of the
radiator.
Over 12 mm
Mounting
platform
Be careful not to
get welding splatter
on nuts, bolts, etc.
on the mounting
platform.
Diameter:
Over 180 mm
Diameter:
Over 180 mm
Thickness: Over 6 mmThickness: Over 6 mm
Bottom of platform
The reinforcement
ribs must be
installed diagonally.