Users Manual Part 5

3. TARGET TRACKING (TT)
3-28
10. Close the menu
11. Highlight the [TRIAL] status indication in the [TRIAL] box, then left-click. The indi-
cation changes from "OFF" to "SET" and the trial maneuver settings appear.
Note: The initial indications for course and speed are derived from own ship’s cur-
rent course and speed at the time when the trial maneuver set up starts.
12. Select the trial maneuver course and reference indication, then left-click.
13. Spin the scrollwheel to set the course, then left-click.
The reference is not changeable here.
14. Set the speed in the same manner as the course.
Setting example for
[
3 TRIAL SPEED RATE
]
5 kn, 0.15 kn/s
10 kn, 0.45 kn/s
Trial speed rate
Trial maneuver speed
5 kn
(First setting)
0.15 kn/s
(First setting)
0.45 kn/s
(Second setting)
10 kn
(Second setting)
Setting example for
[
4 TRIAL TURN RATE
]
5 kn, 1.5 °/s
10 kn, 4.5 °/s
Trial turn rate
Trial maneuver speed
5 kn
(First setting)
1.5 °/s
(First setting)
4.5 °/s
(Second setting)
10 kn
(Second setting)
Trial maneuver course
and reference
Trial maneuver
speed
Delay time
Trial maneuver mode.
“S”: Static; “D”: Dynamic
Trial maneuver
status
[
STATIC
]
mode
[
DYNAMIC
]
mode
Click here