Users Manual Part 5

4. AIS OPERATION
4-8
4.6.2 How to sleep all AIS targets
1. Open the menu.
2. Select [5 TT•AIS].
3. Select [5 AIS].
4. Select [2 SLEEP ALL TARGETS].
5. Select [YES] or [NO] as appropriate.
6. Close the menu.
4.7 How to Set Up For a Voyage
At the start of a voyage, following five items must be input from the [VOYAGE DATA]
menu: navigational status, ETA, destination, draught and crew.
4.7.1 How to access the [VOYAGE DATA] menu
There are two methods by which you can access the [VOYAGE DATA] menu: from
the InstantAccess bar
™
, or from the menu. The following procedure shows the menu
method. If you click the [OWN AIS] button on the lower half of the InstantAccess bar
™
,
skip to step 5 in the below procedure.
1. Open the menu.
2. Select [5 TT•AIS].
3. Select [5 AIS].
4. Select [6 VOYAGE DATA].
5. Select [2 NAV STATUS].
6. Spin the scrollwheel to select the navigation status number, then left-click.
Nav Status
No.
Meaning
00 UNDERWAY USING ENGINE
01 AT ANCHOR
02 NOT UNDER COMMAND
03 RESTRICTED MANEUVERABILITY
04 CONSTRAINED BY HER DRAUGHT
05 MOORED (DEFAULT)