Users Manual Part 8

4. INPUT/OUTPUT DATA
4-3
*
1
: THS and HDT are IEC 61162-2. All other sentences are IEC 61162-1 ed5.
*
2
: For retrofit.
*
3
: To priority of GLL data, see "[PRIORITIZE GLL]" on page 3-22.
*
4
: This is NOT available for IMO-type radars installed with software version “01.**”.
*5
: For C-type radars.
IEC 61162 output sentence
*
6
: This is NOT available for IMO/A/R-type radars installed with software version
“01.**”.
4.2 Sub Monitor
The specifications and timing of sub monitor signals are shown below.
Contents Sentence and priority
Target L/L
TLL*
6
Radar system data RSD
Own ship data OSD
TT target data TTD, TLB, TTM
Alert handling ALR, ALF, ALC, ARC, HBT
Activity information EVE
AIS target message, alert ABM, BBM, ACK, VSD
Monitor Setting DDC
Signal
Name
Specification Signal and timing
OP_HD_
OUT
• Voltage (V): 0 to 12 V
• Impedance: 110 
• Pulse width (PW):
216 to 432 ms
0.625 s (24 rpm, ECDIS overlay)
0.357 s (42 rpm, ECDIS overlay)
• Pulse interval (PI):
2.5 s (24 rpm)
1.4 s (42 rpm)
• Logic: Negative
OP_BP_
OUT
• Voltage (V): 0 to 12 V
• Impedance: 110 
• Interval (t):
6.9 ms (24 rpm)
4.0 ms (42 rpm)
12V
V
PW
PI
0V
12V
㼂
t
0V