Operator's Manual

4. MAINTENANCE
21
4.2 Replacing the fuse
The two 3 A fuses (Type: FGBO-A 125V 3A PBF, Code No. 000-155-850-10) in the snap-in fuse
holder on the power cable protect the equipment from equipment fault and reverse polarity of the
ship's mains. If the equipment cannot be powered, a fuse may have blown. Find out the cause for
blown fuse before replacing a fuse. If a fuse blows again after replacement, contact a FURUNO
agent or dealer for advice.
Use the proper fuse.
Use of a wrong fuse can result in damage
to the equipment or cause fire.
WARNING