Installation Instructions

WAGO connector (for transducer and NMEA port)

2.3 Input/Output Sentences

Input sentences

Sentence Data Remarks

BWC Range/bearing to waypoint

GGA Time, position GPS position

GLC GRI, Time difference Loran C

GLL Latitude and longitude GPS position

GNS GNSS position fixing

GTD Time difference Loran C

HDG Ship's heading, deviation, variation

HDT True heading

MDA Weather information

MTW Water temperature

MWV Wind direction, wind speed (true or apparent)

RMA Latitude and longitude, TD, ground speed and course Loran C

RMB Recommended minimum navigation information

RMC Latitude and longitude, speed over ground and course over ground GPS

VHW True/magnetic bearing, speed through water

VTG Speed over ground and course over ground

XTE Cross track error

att Roll, pitch

hve Heaving data

req Output request for specified attribute

1. Twist conductors

2. Insert opener and press it down.

3. Insert core to hole.

4. Release opener.

5. Pull the core to confirm to make sure it is

tightly fastened.

Opener (attached inner side of shield cover).

Core

Twist.

Press