Operator's Manual
1. OPERATION AND CONTROLS OVERVIEW
1-3
1.4 Menu Overview
1. Press the Menu/Back key to display the main menu. The main menu contents
change according to the current category (See section 1.7 for more information on
categories). In the example below, the wind category is displayed.
2. Press the right software key to select the next item down in the menu, or press
the left software key to select the next item up in the menu. The menu item
currently selected is highlighted in blue. In the example above, [Wind Speed] is
selected.
Note: The key indications for the software keys are blank if there are no more op-
tions in that direction of the menu. In the above example, the menu has no options
in the up direction.
3. Press the function key to open the selected menu. For the purpose of this
example, the [Wind Speed] menu is opened.
4. Press the software keys to select the item you wish to adjust, then press the
function key. The setting options pop-up window is displayed.
5. Press the left software key to select the next item above your current selection,
or increase the value for the current selection.
Press the right software key to select the next item below your current selection,
or decrease the value for the current selection.
6. Press the function key to apply the changes, then press the Menu/Back key to
close the menu.
Ent
Wind Speed
Wind Angle
Disp Config
Alarms
Wind
Sp
ee
d
Wind An
g
l
e
Category specific
menu items are
displayed above
the Main menu
items.
Disp
C
on
f
i
g
A
l
a
rm
s
Scrollbar:
Indicates there
are more menu
items to be
displayed. Press
the software keys
to move up or
down the menu.
Main menu starts
below the
category specific
menu items.
Wind Display:
True
0s(24.5kn)
1.0(24.5kn)
Wind
Damping
:
Adjust(W Speed):
Max TWS Alarm
Wind Speed
Ent
Sailboat
Engine Motor
Power Boat
8
Numerical
pop-up
Setting
options
pop-up