Operator's Manual

ii
SAFETY INSTRUCTIONS
NOTICENOTICE
Observe the following compass safe
distances to prevent interference to a
magnetic compass:
Standard
Compass
Steering
Compass
Mandatory Action
Prohibitive Action
WARNING
Indicates a potentially hazardous situation which, if not avoided,
could result in death or serious injury.
CAUTION
Indicates a potentially hazardous situation which, if not avoided,
can result in minor or moderate injury.
Warning, Caution
pqp
FI-70
IF-NMEAFI
0.30 m
0.30 m
0.30 m
0.30 m
WARNING
Do not open the equipment.
Only qualified personnel should
work inside the equipment. There are
no servicable or replacable parts inside
the equipment.
Do not disassemble or modify
the equipment.
Fire or electrical shock can result if
the equipment is modified.
Do not operate the equipment
with wet hands.
Electrical shock can result.
Safety instructions for the operator
Make sure no rain or water
splash leaks into the equipment.
Fire or electrical shock can result
if water leaks into the equipment.
Immediately turn off the power
at the switchboard if water leaks
into the equipment.
Continued use of the equipment
can cause fire or electrical shock.
Safety instructions for the installer
WARNING
Turn off the power at the switch-
board before beginning the
installation.
Turn off the power to prevent
electrical shock.
Make sure the installation site is
not subject to water spray.
Fire or electrical shock can result if
water leaks into the equipment.
About the TFT LCD
The TFT LCD is constructed using the latest
LCD techniques, and displays 99.99% of its
pixels. The remaining 0.01% of the pixels
may drop out or blink, however this is not an
indication of malfunction.