Brochure

▲
Multifunction display capability, featuring ECDIS,
Conning Information Display, Radar/Chart Radar* and
Alert Management System**
▲
Intuitive new user interface offers fast, precise route
planning, monitoring and navigation data management
Navigation sensors can be directly interfaced with the ECDIS processor’s 8 serial I/O ports.
Sensor adapters are required under the following conditions:
• the sensor data is to be shared amongst multiple networked ECDIS and Radar systems,
• the number of sensors interfaced is more than the number of the ports the processor has (8 serial I/O ports, 1 digital IN and 6 digital OUT), and/or
• the networked sensors include analog sensors.
In order to integrate onboard sensors into the navigation network, the sensor adapter may be interfaced with the switching hub
HUB-100 from which distribution of the sensor data throughout the network is possible.
Alternatively, multiple sensor adapters may be interfaced via Ethernet to integrate onboard sensors for use in the shipboard network.
* a radar sensor needs to be integrated in the network.
** Radar and Alert Management System display capabilities are to be implemented as
software update after product release. (option)
▲
Interface with existing FAR-21x7/FAR28x7 series
Radar for Radar overlay, target track info, route
and waypoint exchange via Ethernet
▲
Complies with the following IMO and IEC
regulations:
• IMO MSC.232(82)
• IMO A.694(17)
• IEC 61174 Ed. 3
• IEC 61162-1 Ed. 4
• IEC 61162-2 Ed. 1
• IEC 62288
▲
Compatible cartography
• IHO/S-57 Edition 3 vector chart
(IHO S-63 data protection scheme)
・
Admiralty Vector Chart Service by UKHO
・
C-MAP ENC
・
Jeppesen Primar ECDIS Service
• ARCS raster chart
• C-MAP Professional+*
*C-MAP Professional+ is a private chart, hence not construed as replacement for paper chart.
▲
Interface with Jeppesen Dynamic Licensing Service
available
▲
Compatibility with Admiralty Information Overlay
(AIO) for further navigation safety
Electronic Navigational Chart Raster Navigational Chart
▲
Instantaneous chart redraw delivered by FURUNO’s
advanced chart drawing engine, making redraw latency
a thing of the past
Instantaneous chart redraw
▲
Ease of installation and maintenance thanks to simplied cabling in the sensor-to-ECDIS/Radar interface
delivered by common sensor adapter
Sensor Adapter acts as central medium to gather all the sensor data and collectively feed it to all FMD-3200/3300 ECDIS and FCR-2xx9 Chart Radar in the system.
Since sensor adapter can be extended to cover all the sensors within the system, individual cablings in the sensor-to-ECDIS/Radar interface can be greatly reduced.
Additional AIO layer includes all Admiralty Temporary and Preliminary
Notices to Mariners as well as additional ENC Preliminary Notices to
Mariners, i.e., reported navigational hazards that have been incorporated
into paper chart but have yet to be included in ENCs. The service is free
of charge as part of Admiralty Vector Chart Service (AVCS) by UKHO.
Models:
FMD-3200/3300
Fast, intuitive route planning and navigation monitoringFast, intuitive route planning and navigation monitoring
Models: FMD-3200
(
with 19" LCD
)
/ FMD-3300
(
with 23.1" LCD
)
Radar Conning Information Display
ECDIS
System diagram
for the current
Model
Model:
FEA-2X07
System diagram
for the new Model
HUB3000
Gyro 1 Gyro 2GPS 1 GPS 2HCS Speed log Anemometer Nav. E.S. AIS
Sensor AdapterSensor Adapter
HUB100 HUB100
HUB100
HUB100
LAN Adapter
B Adapter
Gyro 1 Gyro 2GPS 1 GPS 2HCS Speed log Anemometer Nav. E.S. AIS
B Adapter
LAN Adapter
HUB100
AIO data layer displayed
Chart object window
Place the cursor on the AIO object
and right-click to open the contextual
menu. Select “Object INFO” to open
the chart object window.
The full text of the Notice to Mariners
as well as associated diagrams can
be displayed subsequently.
On the chart object window,
select the AIO object and click
"OK" to view the details.