Certification

ManualsBrandsFuruno ManualsChartplottersFuruno FMD3300

New IHO S63 1.1 Public Key for ECDIS

Please refer to below general Public Key installation information as well as attached Furuno specific

info for installation of new IHO S63 1.1 Public Key for ECDIS.

How to Install a New IHO Certificate in ECDIS.

The current IHO certificate, which holds the public key for the S-63 decryption, is due to expire in

August 2013. The IHO has recently released a new certificate, which is valid until 2033. To obtain this

new certificate it is recommended to visit the IHO website and download the file ‘New IHO Certificate

Expires 2033’.

Extract the IHO.CRT file from the downloaded ZIP file and store the IHO.CRT on a

removable media (e.g. USB Drive) in order to transfer it into ECDIS. S-63 Edition 1.0 CDs have a

certificate stored on the CD itself, so the IHO.CRT stored in ECDIS is not needed for S-63 Edition 1.0

charts.

S-63 Edition 1.1 Media will not have a certificate on the media. For S-63 Edition 1.1 the IHO.CRT file

stored in the ECDIS will be used. If the stored IHO.CRT has expired a warning will be generated during

the import of S-63 charts, but the import will proceed anyhow.

Please find here the download link.

Summary of content (4 pages)

PAGE 1
New IHO S63 1.1 Public Key for ECDIS Please refer to below general Public Key installation information as well as attached Furuno specific info for installation of new IHO S63 1.1 Public Key for ECDIS. How to Install a New IHO Certificate in ECDIS. The current IHO certificate, which holds the public key for the S-63 decryption, is due to expire in August 2013. The IHO has recently released a new certificate, which is valid until 2033.
PAGE 2
FEA-2107 Public Key Installation 8.6.11 How to manage public key from an RENC, JHA The procedure below shows how to manage a public key. There are two types of public keys: • • RENC: Primar, AVCS (file name: PRIMAR.PUB) JHA (file name: IHO.PUB) You must load a public key when you load a chart. 1. Select Chart Permits from the Chart menu. Source filter Select All ALL Unselect All 2. Click the Public Key button to show the Public Key Dialog box.
PAGE 3
. Insert the floppy disk/CD-ROM/USB memory that contains the public key then click the Load New button to load a new public key. The "Permit load" dialog box appears. Permit Load Drive A A: Go Up IHO.PUB for JHA PRIMAR.PUB Load 4. Select "PRIMAR.pub" (or IHO.PUB) from the Contents window then click the Load button. The Public Key Dialog box appears, showing the contents loaded to the ECDIS.
PAGE 4
FMD ECDIS Public Key Installation The procedure below shows how to install a public key. Public keys are used with ENC charts that support S-63 authorization. The public key is pre-installed; however, you must install a new public key whenever you install new chart or updates to existing charts. Generally, there are two types of public keys: • RENC: For example, Primar (file name: PRIMAR.PUB) • JHA (file name: IHO.PUB) You must load a public key whenever you load a chart. 1.