Marine GPS System User Manual

3-6
2. Press the [6] key to display the VIDEO
SOUNDER SETUP menu.
3. Press ▲ or ▼ to select DEP CHIME.
4. Press t or s to select ON or OFF.
5. Press the MENU key.
3.12 Selecting Unit of Depth
Measurement
You may display the depth in meters, feet or
fathoms as follows:
1. Press the MENU key.
2. Press the [0] key to select SYSTEM
MENU.
3. Press the [4] key to display the UNIT
SETUP menu.
UNIT SETUP
DISTANCE
DEPTH
TEMP
nm
m
°C
: Cursor ESC: Esc
°F
km
ft
sm
fa
Figure 3-13 Unit setup menu
4. Operate the Cursor Pad to select Depth.
5. Operate the Cursor Pad to select m, ft, or
fa.
6. Press the MENU key.
3.13 Offsetting the Depth
Readout
If the depth displayed is not correct you may
offset to it to correct the correct value as fol-
lows:
1. Press the MENU key.
2. Press the [0] key to select the SYSTEM
SETUP menu.
SYSTEM MENU
1. SELF TEST
2. PLTR SETUP
3. SOUNDER SETUP
4. UNIT SETUP
5. SENSOR SETUP
6. NMEA SETUP
7. GPS SETUP
8. DGPS SETUP
9. CHART POSN CALIB
: Cursor
ENT: Sel ESC: Esc
Figure 3-14 System menu
3. Press the [5] key to select SENSOR
SETUP.
SENSOR SETUP
SPD SENSOR STW SOG
TEMP SENSOR OWN NMEA
SPD CALIB +00%(-50~+50)
TEMP CALIB +00.0 °C
DEPTH CALIB +0.0 m
: Cursor : +/-
ESC: Esc
Figure 3-15 Sensor setup menu
4. Press ▲ or ▼ to select DEPTH CALIB.
5. Enter correction with numeric keys.
6. Press the ENT key.
7. Press the MENU key.
3.14 Displaying the Water
Temperature Graph
A water temperature graph can be displayed.
This function requires a water temperature
sensor.
To turn on/off the water temperature graph:
1. Press the MENU key.
2. Press the [6] key to display the VIDEO
SOUNDER SETUP menu.