Marine GPS System User Manual

12-1
OPTIONAL EQUIPMENT SETUP
12.1 Selecting Sensors
The sensor setup menu provides for selection
and calibration of speed and temperature sen-
sors (optional equipment).
1. Press the MENU key.
2. Press the [0] key.
3. Press the [5] key.
SENSOR SETUP
SPD SENSOR
TEMP SENSOR
SPD CALIB
TEMP CALIB
DEPTH CALIB
STW
OWN
+00% (-50~+50)
+00.0 °C
+0.0 m
SOG
NMEA
:+/-
: Cursor
ESC: Esc
Figure 12-1 Sensor setup menu
SENSOR SETUP menu description
SPD SENSOR: Select speed input source;
navaid or internal.
TEMP SENSOR: Select device (option)
which feeds temperature data; external or in-
ternal.
SPD CALIB: Enter offset to correct speed
data.
TEMP CALIB: Enter offset to correct water
temperature data.
DEPTH CALIB: Enter offset to correct
depth.
12.2 Selecting Autopilot,
Remote Display
The NMEA menu provides for selection of
autopilot or remote display and its format.
1. Press the MENU key.
2. Press the [0] key.
3. Press the [6] key.
NMEA SETUP
FORMAT
EXT DEVICE
183V1.5
REM
: Cursor ESC: Esc
183V2.0
PILOT
Figure 12-2 NMEA setup menu
4. Select format of connected external de-
vice; NMEA format 0183V1.5 or
0183V2.0.
5. Select type of external device connected;
REMote display or autoPILOT.
6. Press the MENU key to register selec-
tions.
12.3 Setting up DGPS Beacon
Receiver
With connection of an external DGPS bea-
con receiver (option), GPS position accuracy
becomes within 5 to 10 meters.
The specifications of the DGPS beacon re-
ceiver should be set on the DGPS setup menu.
1. Press the MENU key.
2. Press the [0] key.
3. Press the [8] key.