Installation Instructions

10
BBWX1 Receiver:
• Important REMINDER: Record both the Sirius Data and Audio Serial
numbers as identified on the underside of your receiver before mounting.
• Orientation of the unit to be such that the connector panel is pointing down and
receiver be mounted on a vertical face.
• A minimum of 6” [152mm] is required to be left below the connector panel to
allow for adequate clearance for connections and cable bends.
1. Mark the location of the three fixing holes by using the unit as a template.
2. Drill through the marked positions using the #36 drill bit.
3. Mount the receiver using the three #6 x 5/8 lg type A, S/T screws supplied.
* depending on thickness of substrate the holes may require enlarging.