Installation Instructions

4
Contents of Package:
• BBWX1 Receiver Module
• SRA-40 Antenna Kit [includes 25 ft {7.6m} cable and mounting kit for various
thicknesses of mounting substrate].
• Power Cable 10 ft [3m]. 3 pin connector, 20 AWG 2 wire and shield.
• Ethernet Cable 10 ft [3m]
• Screws [3] #10 x 1” long, Type A, S/ T, ST/ST for mounting Antenna.
• Screws [3] #6 x 5/8” long, Type A, S/ T, ST/ST for mounting Receiver.
• Operator’s Guide
Tools Required:
• Drill
• Phillips screwdriver.
• 9/16” drill bit [centre hole for passing cable attached to the antenna base].
• 7/64” drill bit [3 mtg holes for antenna base].*
• #36 drill bit [3 mtg holes for receiver unit].*
• Pencil/ marker for marking location of holes.
* depending on thickness of mounting substrate, holes may be required to be enlarged.