Operator's Manual

27
Installation
IND100078-34
Installation Procedures
Mounting Bracket, Table / Desktop / Ceiling - 12”,15”,17”,19”
Procedure suitable for: Display (MMD/STD) and Panel Computer (MMC) Series X product ranges.
Two versions of bracket exists, please review the table below to identify your unit model and bracket type. Brackets
that are currently sold/delivered are marked with green color. Those which are obsolete (and replaced by newer type
of bracket) are shown in red color. The two bracket types exists due to slight variation in manufacturing and EN60945
testing regarding the unit’s mounting holes (key hole) that exist with either “single key hole” or “double key hole”.
Bracket Arms are clearly marked with Typenumber label so you can identify which version you have (BRD or TMB).
Note: If you ordered a unit with mounting bracket from factory, the corresponding matching bracket has been already
been chosen to ensure correct tting. If you order brackets separately at a later date, you should study the table
below carefully as well as review the type of key hole your Display or Panel Computer units has. If unsure, please
contact Hatteland Display for support in choosing the correct bracket version (BRD or TMB).
Table last updated 24 June 2013. Throughout 2013/2014 the BRD versions will be phased out of production and only
TMB versions will remain available for manufactured units.
Typenumber Illustration Fits unit model Notes Status
HD 12BRD SX1-A1 HD 12T21 MMD-xxx-Fxxx
HD 12T21 STD-xxx-Fxxx
HD 12T21 MMC-xxx-xxxx
Not sold, used for prototypes only. Fits
Single Key Hole Chassis only.
Not EN60945 Tested.
For Double Key Hole Chassis, use
HD TMB SX1-A1 (EN60945 Tested).
HD 15BRD SX1-A1 HD 15T21 MMD-xxx-Fxxx
HD 15T21 STD-xxx-Fxxx
HD 15T21 MMC-xxx-xxxx
Sold since January 2013, ts only Single
Key Hole Chassis.
Not EN60945 Tested.
HD 17BRD SX1-A1 HD 17T21 MMD-xxx-Fxxx
HD 17T21 STD-xxx-Fxxx
HD 17T21 MxC-xxx-xxxx
“HW blank” and “HW00”:
Sold since June 2012, ts only Single
Key Hole Chassis.
“HW01”:
For Double Key Hole Chassis, use
HD TMB SX1-B1.
Not EN60945 Tested.
HD 19BRD SX1-A1 HD 19T21 MMD-xxx-Fxxx
HD 19T21 STD-xxx-Fxxx
HD 19T21 MxC-xxx-xxxx
“HW blank” and “HW00”:
Sold since March 2012, ts only Single
Key Hole Chassis.
“HW01”:
For Double Key Hole Chassis, use
HD TMB SX1-B1.
Not EN60945 Tested.