Operator's Manual

Technical Drawings - HD CMB SX1-B1
91
IND100132-240
This document is the property of Hatteland Display AS. This document and any authorized reproduction thereof, must not be used in any way against the interest of Hatteland Display AS. Any authorized reproduction, in whole or in part, must include this legend. Hatteland Display Proprietary information. Not to be distributed to any third party without written permission.
Dimensions might be shown with or without decimals and indicated as mm [inches]. Tolerance on drawings is +/- 1mm. For accurate measurements, check relevant DWG file.
Flush Mounting 24”
FRONT VIEW SIDE VIEW BACK VIEW
PANEL CUTOUT FOR HD 24T21 XXX-XXX-XXXX, FLUSH MOUNTING.
Units: mm [inches]
H
12
G
F
E
3
4
56
D
C
B
A
123
4
56
78 78
G
F
E
9 10
D
C
B
1 1 1 2
A
9 10 11 12
H
07-11-2011
7251
Hatteland Display AS
Åmsosen
N-5578 Nedre Vats
P006801-1
Date:
Mechanical Designer
Projection:
This document is the property of Hatteland Display AS. This document and any authorized reproduction thereof, must not be used in
any way against the interest of Hatteland Display AS. Any authorized reproduction, in whole or in part, must include this legend.
--
1
Revision:
Approved by:
Drawing number:
HATTELAND DISPLAY STANDARD
Material type and Quality: Surface treatment:
Sheet metal fasteners:
Welding specification Tolerance:
Aluminium 5052; standard EN 485-2 (1 & 2)
St-37 Alu/Zink; standard EN 10215 (1)
Stainless Steel AISI 316 L; standard EN 4404
(1) TRIKATION (Zinc/Mangan Phosphatizing)
(2) Powder coating RAL 9011 EPOXY STRUCTUR
Du Pont: EP0301-4950327
PSM International or equivalent
(www.psminternational.com)
NS-EN-288-4
ISO 2768-1 middel
Created by:
4701
Date:
23-09-2004
Modified by:
7251
Date:
14-03-2008
Revision
2
Size: A1 Format
1:3
Colour code:
Scale:
Surface treatment:
581,00 22,87
372,00
14,65
594,00
23,39
385,00 15,16
4 x R
4,00
0,16
4 x R
4,00
0,16
6,50 0,26
6,50 0,26
AA
Console thickness.
16,00 0,63
220,00 8,66
4 x R
4,00
0,16
C
L
C
L
8,00 Sunken face for Display.0,31
10,00 Max thickness for mounting the bracket.0,39
Console thickness.
A-A (2 : 1)