Brochure

NavNet TZtouch2/TZtouch
RRU
Pump
CAN bus (NMEA2000)
Processor
FAP-7002
Photo: Model TZT14
NAVpilot-711C
Autopilot control by NavNet TZtouch2/TZtouch
NEW
NEW
Perfect match!
NAVpilot cable
CAN bus (NMEA2000)
Others
Furuno NAVpilot-711C is designed to match
the new NavNet TZtouch2, NavNet TZtouch
and new FI-70 Instrument/Data organizer and
other navigation equipment. The “Plug and Play”
CAN bus interface allows for easy installation
and exceptional interface ability.
The diagrams below show typical installations
for power and sail boats.
If you have your boat equipped with a
NavNet TZtouch2 or TZtouch system you
can take full advantage of the
NAVpilot-700/711C from the NavNet
TZtouch series display. You can activate
the AUTO mode of the NAVpilot-700/711C
and change the set course by tapping on
arrow buttons, by adjusting a slider bar
with your nger or the RotoKey
TM
, or by
dragging the course arrow with your nger.
SAIL BOATPOWER BOAT
Multi Function Display
NavNet TZtouch
NAVpilot-700
NAVpilot-711C
Instrument/Data Organizer
FI-70
Instruments/
Data Organizer
FI-70
Processor unit
FAP-7002
Rudder Reference unit
FAP-6112-200
Rudder Reference unit
FAP-6112-200
Heading sensor
PG-700
NAVpilot-711C
NAVpilot-700
Instrument/Data Organizer
FI-70
Analog NMEA Data Converter
IF-NMEAFI
Junction Box
FI-5002
Wind Transducer
FI-5001L
Processor unit
FAP-7002
Hydraulic pump
Heading sensor
PG-700
Junction Box
FI-5002
Multi Function Display
NavNet TZtouch
Multi Function Display
NavNet TZtouch2
NAVpilot-711C
Junction Box
FI-5002
Heading sensor
PG-700
Processor unit
FAP-7002
Hydraulic pump
(Outboard/Sterndrive)