Cut out shaded area only
96 mm(3.78”)
113 ±1 mm(4.45” ±0.04”)
101 mm(3.97”)
Drill hole of 10 mm
(0.39”) in dia.
Pilot hole for 3×20 mm
self-tapping screw.
Control Unit FAP-7011
Flush Mount Template
118 ±0.5 mm(4.65” ±0.02”)
108 ±1 mm(4.25” ±0.04”)
60 ±0.5 mm(2.36” ±0.02”)
