Installation Instructions

1. INSTALLATION

1-6

• Make sure there are no objects near the vent.

• Leave enough space around the unit for maintenance and servicing. The recom-

mended maintenance space appears in the outline drawing at the back of this manual.

• Observe the compass safe distances shown in the safety instructions on page i to pre-

vent interference to a magnetic compass.

Install the unit as follows:

Tabletop: Fasten with four self-tapping screws.

Bulkhead: Screw in two self-tapping screws for the upper side. Leave approximately 5

mm of the screws exposed. Hang unit on screws and tighten screws. Screw in two self-

tapping screws for lower side and tighten.

259(10.2")

90(3.54")

#85(3.34")

CABLE INLET

144±1(56.7"±0.03")

219(8.62")

VENT

#70(2.75")

255(10.0")

230±1(9.06"±0.03")

EARTH

TERMINAL

(FIXING

HOLE)

φ5

(0.2")

(1.73")

12(0.47")

R6(0.24")

#70(2.75")