Installation Instructions

1. INSTALLATION

1-13

1.6 Control Unit FAP-7021

The Handheld Control Unit FAP-7021 can be mounted on the bulkhead or desktop using

the cradle.

When selecting a location for the Control Unit, keep the following in mind.

• Mount the unit where shock and vibration are minimal.

• Do not install the display unit under "Plexiglas" or other type of shielding material. Plexi-

glas can trap heat and moisture or magnify sunlight energy onto the surface of the dis-

play.

• Follow the compass safe distances shown in the safety instructions on page i to pre-

vent interference to a magnetic compass.

For the cradle mount, fix the cradle to the mounting location with four self-tapping screws

(4x20, supplied), referring to the outline drawing for mounting dimensions. Put the Control

Unit in the cradle.

1.7 Cable Extension Kit FAP-7822 (option)

The Control Unit FAP-7021 comes with a 10 m cable. If the cable is not long enough, use

the Cable Extension Kit FAP-7822, which provides for extension of the cable an additional

10 m.

Type: Cable Extension Kit FAP-7822 Code No.: 001-082-780

Fix the Connector Fixing Box with four self-tapping screws (4x20, supplied). Refer to the

outline drawing for mounting dimensions.

Note 1: When the Control Unit is not connected, attach the terminator (supplied) to the

Connector Fixing Box.

Note 2: To connect the extension cable to the Processor Unit, remove the connector.

Name Type Code No. Qty

Connector fixing box 64-027-1011-2

100-327-882-10

Label 64-027-1012-1 100-327-891-10 1

Self-tapping screw 4x20 000-158-850-10 4

Cable BD-07PM-07AF-LR-100 000-172-016-10 1