Operator's Manual

3. CUSTOM SCREEN
3-3
8. Use the Cursorpad (S or T) to select an option desired and press the ENT key.
Style options (e.g. [Speed] category)
Note: The menu items in gray are not available.
9. Use the Cursorpad (S or T) to select [Digital], [Analog] or [Graph] then press the
ENT key. If you selected the no-split screen at step 5, go to step 12. For the other
types, go to step 10.
Note: The available style options depend on the selected screen division, catego-
ry and category option. The unavailable style option is displayed in gray.
10. Use the Cursorpad (S or T) to select [B (C, D, E or F)] and press the ENT key.
11. Repeat steps 7 to 10 to set the category and the style option for each split screen.
12. Press the DISP key to close the menu and display the data screen.
Note: If you selected the depth graph in the split screen, the updating for the data of
other data screens can slow. For example, if you selected the depth graph on [A] in
horizontal/vertical three-way split 1, the updating for the data of [B] and [C] can slow.
3.2 Options for Categories
See the table below for the options for each category.
Category Option Description Indication
Depth Depth Water depth Depth
Speed STW Speed Through the Water STW
STW MAX Maximum STW STW MAX
STW AVG Average STW STW AVG
SOG Speed Over the Ground SOG
SOG MAX Maximum SOG SOG MAX
SOG AVG Average SOG SOG AVG
VMG Velocity Made Good: Velocity com-
ponent to windward
VMG
Trip Trip distance Trip
Odometer Total trip distance Odo, Odometer
A
B
C
Depth graph
Horiaontal/vertical three-way split