Operator's Manual

7. SYSTEM MENU
7-2
4. Use the Cursorpad (S or T) to select [Depth], [Speed], [Distance], [Wind Speed],
[Temperature], [Fuel] or [Engine Pressure] then press the ENT key.
5. Use the Cursorpad (S or T) to select an option and press the ENT key.
6. Press the DISP key to close the menu and display the data screen.
7.2 How to Set the Offset
Offset for depth, wind angle and water temperature
When there is an error of constant value for depth, wind angle or water temperature
data, you can set the offset to eliminate an error. For example, enter -1.5 °F when the
water temperature is always displayed at 1.5 °F higher than the actual temperature.
1. Press the MENU key to open the menu.
2. Use the Cursorpad (S or T) to select [System] and press the ENT key.
3. Use the Cursorpad (S or T) to select [Offset] and press the ENT key.
4. Use the Cursorpad (S or T) to select [Depth], [Wind Angle] or [Water Tempera-
ture] then press the ENT key.
Setting window
5. Use the Cursorpad (S or T) to select [+] or [-] then use the Cursorpad (X) to
move the cursor to the right.
Depth Speed Distance Wind Speed
Temperature Fuel Engine Pressure
Depth Wind Angle Water Temperature