Operator's Manual

7. SYSTEM MENU

7-4

7.3 Response Time

You can set the response time for each data as follows. The input raw data is aver-

aged by the response time.

1. Press the MENU key to open the menu.

2. Use the Cursorpad (S or T) to select [System] and press the ENT key.

3. Use the Cursorpad (S or T) to select [Response Time] and press the ENT key.

4. Use the Cursorpad (S or T) to select the menu item desired and press the ENT

key.

5. Use the Cursorpad (S or T) to set the value and press the ENT key to save the

setting. To close the window without saving, press the MENU key (instead of the

ENT key). The setting range is 0 - 12 seconds. The higher the setting, the slower

the response of the display. “0” second means no average.

6. Press the DISP key to close the menu and display the data screen.

7.4 Scale Range

You can set the scale range for the analog meter.

Example screens

1. Press the MENU key to open the menu.

2. Use the Cursorpad (S or T) to select [System] and press the ENT key.

Engine Oil Temperature: 150-250

F Engine Oil Temperature: 120-300