Operator's Manual

1. MOUNTING
6
Installation examples for a pleasure boat
No tuna tower
With tuna tower
Sensor fixed to
a platform
Do not mount the sensor
like this.
Vibration can damage the
sensor.
Fixing hole
Fixing hole
Fixing holes should "surround"
the sensor. Further, fix the
mounting pole at a right angle.
The recommended
dimensions for the pole are
Diameter: more than
φ
80 mm
Length: less than 500 mm
Radome
radar antenna
Fix directly to vessel, above
other equipment as much
as possible.
Pipe with
large diameter
Fix sensor to pipe at stern side of
sensor if guardrail or the like runs
to top of tuna tower, etc.
No pipe