User's Manual

MaxSea TimeZero Recreational v2

thout Terrain Shading (0) With Terrain Shading 50% filtered

Note that the Terrain shading filter is available for all together 3D database.

Terrain Sharpness: This parameter allows to “smooth” or “sharpen” the 3D PBG data. Enter

directly a value between 0 to 100 or click and move the cursor along the slide bar to increase or

decrease the value. The Terrain Sharpness can be directly adjusted under PBG ribbon.

Without Terrain Sharpness With maximal Terrain Sharpness

Note that the Terrain Sharpness filter is only available for the 3D PBG recorded zone.

configure depth sounder received signal

(Exclusively included in MaxSea Explorer)

Adjust the receiving Depth data depending on the sounder characteristics

Before turning on the PBG function it is recommended to adjust several parameters under the

"Options" menu.

First time you will have to enter the position of your sounder in the Transducer Draft in the Install

Options menu as you did for the keel draft.

This option allows you to choose an immersion value for your Echo Sounder head in case it is not self

compensated. It is also important to correct the offset of longitudinal and lateral Transducer Positions.

GPS position

Transducer position

These parameters can be defined in the

Install Options Menu

NavData Maximum Depth: is where to change the DPT NavData's Display scale depending on the

depth (very shallow/shallow/deep/very deep).

116