User's Manual

Network Camera
Note that the FLIR M-Series does not output video via Ethernet. According to the model, the FLIR M-
Series has one or two analog video outputs (on BNC connection) which can be connected to a monitor,
an AXIS Video encoder or a Video Amplifier/Distributor (if the video needs to be split to multiple
monitors. If you want the video to be displayed on MaxSea TimeZero (inside a NavData), you will have
to use an AXIS Video encoder (AXIS 241S) in order to convert the analog video feed into IP video.
Note: If the Monitor is nearby the PC, the AXIS 241S Video Encoder is optional. You can control the
Camera from TimeZero while looking directly at the monitor.
M-Series Configuration
When a Flir M-series camera is connected MaxSea enables advanced functions :
Right click a chosen position on the chart and choose "Move Camera Here" in the menu to adjust
orientation of the camera.
Right click any where on the chat and choose "Lock Camera on this position" in the menu. The Camera
will keep the observation of the position independently of the ship's movement.
You can also lock the camera on different ways:
 Object selected on chart (AIS target, ARPA target, Mark, etc.... ). To do right click
object and choose "Lock Camera on tis object".
 Click on Camera to select and display the camera cone on the chart as it
is shown in picture below:
129