User's Manual

References
Display Raster chart Unit legend : check and a new legend will be added in the left-corner and
inform user on the Raster chart actual unit.
Grid Interval: indicates the grid interval (ranges from very low to very high) that can be turned ON
and OFF from the "Chart" button located in the Ribbon
Transparencies: The following objects’ transparency can be adjusted:
 PhotoFusion Transparency Offset: Manipulates the intensity of
PhotoFusion transparency offset (ranges from 0-80)
 Tidal Currents Transparency: Manipulates the intensity of tidal Currents
transparency (ranges from 0-80)
 Depth Shading Transparency: Manipulates the intensity of depth
shading transparency (ranges from 0-80)
 Bottom Hardness Transparency : Manipulates the intensity of Bottom
hardness (bottom classification) transparency (ranges from 0-80)
 Weather Color Transparency: Manipulates the intensity of weather color
transparency (ranges from 0-80)
3D Display: While in 3D mode, the following options control the exaggeration of depth and altitude
displayed :
 3D Alti Exaggeration: Determines the exaggeration of land altitudes displayed while in 3D
mode.
 3D Bathy Exaggeration: Determines the exaggeration of water depths displayed while in
3D mode.
Depth Shading Values: When the depth shading is turned on , the range and hue of the depth color
scale can be controlled using the following options:
 Depth Shading Mode: TimeZero looks for the shallowest and deepest points and
automatically adjusts the range accordingly. .Three modes can be configured:
1. Auto mode automates the range of water depths to be shaded according to the
area displayed on the screen. In this mode, the color scale range is continuously
updated as you pan or zoom the charts
2. Manual mode automates the range of water depths to be shaded according to the
area displayed on the screen and following values that user has fixed.
3. Minimum Value: Fixes the minimum water depth value to be shaded. (grayed with
the auto mode)
4. Maximum Value: Fixes the maximum water depth value to be shaded.(grayed with
the auto mode)
5. Depth Color Palette: Determines the color palette used for depth shading.
Sea Surface Temperature (SST) Values: The range of Sea Surface Temperature shading can be
controlled using the following options:
 Auto Color Scale: Automates the range of temperatures to be shaded. TimeZero looks for
the warmest and coldest points and automatically adjusts the range. In this mode, the color
scale range is continuously updated as you pan or zoom the charts
 Minimum Value: Fixes the minimum water temperature value to be shaded.
 Maximum Value: Fixes the maximum water temperature value to be shaded.
151