User's Manual

2-2 Setting for Direct Connection Between Model TZT9/14/BB and iOS Devices

(1) TZT9/14/BB – Menu Steps to Enable Ad-Hoc/Point-to-Point Configuration

TZT9/14/BB acts as the access point for the iOS devices. The iOS devices will find the SSID and password setting in the

[Create local network] box of the TZT9/14/BB menu.

[Menu] – [General] – [Wireless LAN Setting]:

Tap [Select].

Wireless: ON

Wireless Mode: Create local network

Authentication: WEP

Network Status: ON

SSID and Password: The default SSID is [NAVNETTZT] and

password is [NAVNETTZTOUCH].

To change the default SSID and password, Set the Network

Status to OFF and set your own SSID and password.

IMPORTANT NOTE: When wireless connection is made via the TZT9/14/BB built-in wireless LAN…

(1) Set Wireless Mode to [Create local network] for iOS devices to access the TZT9/14/BB, and to [Connect to existing

LAN] for the TZT9/14/BB to access the Internet.

(2) The SSID name and password are always in upper case letters. Ensure to enter the password in upper case on iOS

Tap