System Overview 1
INDEX 1. NavNet TZtouch2 1-1 Model TZT12F and TZTL15F 1-2 Total Control, Simply Refined… 5-2 Replacement from NavNet vx2 – Front Mounting for Model TZTL12F 5-3 Replacement from NavNet 3D – Front Mounting for Model TZTL12F 2. Product Overview 2-1 Appearance 2-2 Specifications 2-3 Comparison with NavNet TZtouch 5-4 Front Mounting for Model TZTL15F 5-5 Pigtail Cables 5-6 Front Cover 6. Networking NavNet TZtouch2 3.
1. NavNet TZtouch2 1-1 Model TZT12F and TZTL15F NavNet TZtouch2, the second generation of NavNet TZtouch series, has two (2) models: TZTL12F (12.1”-diag) and TZTL15F (15.6”-diag). This document describes the overview of these new models. Model: Model: 1-2 TZTL12F TZTL15F Total Control, Simply Refined… “Total Control, Simply Refined” describes the NavNet TZtouch2 User Interface Concept.
Built-in RezBoost™ Fish Finder RezBoost™ is a revolutionary new technology built-in to TZT2, to produce high-definition Fish Finder echo resolution and separation. By utilizing conventional narrowband transducers, echo images will be up to 8x sharper, thanks to advanced post signal processing. It also saves money by allowing customers to use their existing installed transducers to achieve enhanced clarity and sharper targets.
2. Product Overview 2-1 Appearance The TZTL12F/15F MFDs provide a large screen for their bezel size, thanks to minimized hardware keys. The rear side is slimmer, lighter and much more water-resistant than any other Furuno MFD! The glass face is impervious to water! Front View No Items (1) Descriptions User-friendly 1 Multi Touch Screen Edge Swipe functionality along with a bonded touch screen provides very high contrast even under direct sunlight.
2-2 Specifications (1) Options – New No FUSA P/N Model Descriptions/Remarks 1 SDU001 SDU-001 MicroSD card reader 2 001-337-410-00 OP19-13 Bracket for TZTL12F 3 001-337-420-00 OP19-14 Bracket for TZTL15F 4 001-337-430-00 OP19-15 *(1) 5 001-337-440-00 OP19-16 *(1) 6 001-337-450-00 OP19-17 *(1) Front mount panel for TZTL15F 7 OME-448-70Z OME-44870-A Hardcopy of Operator’s Manual in English (OME) Adapter panel for retrofit from GD1920C to TZTL12F It can be used as a front mount
Protection Level IP56 (both front and rear sides) Power/Consumption 12-24 VDC (3.0-1.5 A), 36 W 12-24 VDC (3.6-1.8 A), 43.2 W Notes: (1) The TZTL12F/15F reads Mapmedia charts in mm3d format copied to a microSD card or USB Memory. Unlocking procedures are the same as TZtouch via unlocking codes or automatically obtained with Internet Connection.
Operator’s Manual Compatible Apps *(1) User guide (eGuide) built-in (HTML) NavNet Viewer NavNet Controller Note: (1) The TZTL12F/15F is NOT compatible with the NavNet Remote app. 2-3 Comparison with NavNet TZtouch General LCD Size TZTL12F/15F TZT9/14/BB 12.1”-wide / 15.6”-wide 9”-wide / 14.
Contact Closure Operator fitness output N/A Buzzer Output 1 port for external buzzer 1 port for external buzzer Power Output for DRS No port (PSU-017/012/013 necessary) No port (PSU-017/012/013 necessary) Card Slot 1 slot at the rear side for microSDXC 2 slots for SDXC *(1) Among two (2) video input sources, either one of the video images can be shown on the screen. See Section 6-6 for details.
3. Operating NavNet TZtouch2 The TZTL12/15F User Interface is similar to the NavNet TZT9/14/BB but has refined operational features. This section provides an overview of the key operational differences. 3-1 Multi Touch Control The TZTL12F/15F can be controlled by multi touch operation. In addition to smooth pinch-to-zoom, a generously sized “Slider Bar” is available on the screen for range adjustments. The TZtouch Dual-tap gesture feature is also available with NavNet TZT2.
3-5 More Information by eGuide A built-in Operation guide is available on the TZTL12F/15F screen to help answer questions on basic features and operation. 4. Utilizing Wireless Solution The TZTL12F/15F with built-in wireless LAN offers multiple features and solutions. 4-1 NavNet Viewer and NavNet Controller Apps The TZTL12F/15F supports the NavNet Viewer and NavNet Controller apps. Utilize your Android Mobile keypad with the NavNet Controller App for wireless remote operation.
4-2 Internet – Weather and Software Download Connected to the Internet, TZT2 MFDs have unlimited free access to an incredible weather download service just like the TZT9/14/BB. Weather forecast up to 16 days is available from NavCenter and can be displayed on the dedicated Weather page of the TZTL12F/15F. Free Chlorophyll and Altimetry data are readily provided.
5.
TZTL15F – Bracket Mount (Option: OP19-14 / P/N 001-337-420-00) SDU001 (Option) 14
5-2 Replacement from NavNet vx2 – Front Mounting for Model TZTL12F 10.4” NN1/VX2 display to TZTL12F with OP05-15 (001-337-430-00) A 10.4” NN1/VX2 display has a larger cutout hole than a TZTL12F. The adapter panel OP05-15 (Part # 001-337-430-00) helps to fill the hole and install the TZTL12F from the front side. While both OP05-15 (001-337-430-00) and OP-16 (001-337-440-00) in Section 5-3 work as front mounting panels, the OP05-15 (001-337-430-00) below is recommended due to its smaller size. NN1/VX2 10.
5-3 Replacing a NavNet 3D MFD12 – Front Mounting for Model TZTL12F MFD12 to TZTL12F with OP05-16 (001-337-440-00) The MFD12 has a larger cutout hole than a TZTL12F. The adapter panel OP05-16 (Part # 001-337-440-00) helps to fill the hole and install the TZTL12F from the front side. While both OP05-15 (001-337-430-00) in Section 5-2 and OP-16 (001-337-440-00) works as front mounting panels, the OP05-15 (001-337-430-00) is recommended due to its smaller size.
5-4 Front Mounting for Model TZTL15F The OP19-17 (Part number 001-337-450-00) can be used to mount the TZTL15F from the front side.
5-5 Pigtail Cables Pigtail 1 shown at left is packaged by most frequently used cables, while pigtail 2 is mainly for optional interconnections. Each cable is labeled with its port name. You can easily find an appropriate port on the pigtail cables. (1) (2) 5-6 No Label Remarks 1 NETWORK For Ethernet sensors 1 NMEA2000 For NMEA2000 sensors 1 (Nil.) Multi ports for NMEA0183 output, etc. 2 USB USB port for SDU-001, MCU002, etc.
6. Networking NavNet TZtouch2 6-1 Compatible Sensors Network Ethernet Sensors DRS series, DFF1-UHD, DFF1/3, BBDS1, Not compatible with BBFF1/BBFF3 FA30/50, FAX30 No Ethernet network with FAR2xx7/FCV1150 NMEA2000 (See Remarks) NMEA0183 (See Remarks) Camera 6-2 Remarks Analog cameras only Refer to input/output PGN specifications. Output: Refer to output sentence specifications. Input: Use a converter such as IF-NMEA2K2.
6-4 Utilizing Model SDU001 and MCU002 via the USB Port The microSD reader SDU001 and remote controller MCU002 can be connected via USB. Notes: (1) When both SDU001 and MCU002 are used, arrange a USB hub locally. (2) Use one (1) SDU001 and MCU002 per or 6-5 display. Utilizing an External Monitor TZTL12F/15F with External Monitor (and MCU002) NO Touch Operation with External Monitor The TZTL12F/15F can output a clone image to an external monitor in HDMI format.
Note: Among two (2) analog camera inputs, the TZTL12F/15F can assign one camera screen per display. Two (2) camera images cannot be simultaneously shown on both quarter (1/4) screens as shown at right. To see each camera image, switch sources between each source on one camera screen as shown at left. 6-7 Heaving Compensation Heaving compensation is NOT Good (with Network Sounder) NOT Good available with the built-in Fish Finder.
6-9 Retrofit from NavNet 3D Retrofit to TZTL12F/15F Original – MFD8/12 (NavNet 3D) In this example, the MFD8/12 units are replaced with TZTL12F/15F. While the TZTL12F/15F can use the same Ethernet sensors as the MFD8/12/BB, the following changes are necessary to cope with more redundant Ethernet and NMEA2000 network architecure. (1) PSU-017/012/013 is added for DRS2D/4D/4A/6A/12A/25A. Another Ethernet cable is necessary between the PSU and hub.
6-11 Integrated Network with NavNet TZtouch The Ethernet and NMEA2000 network architecture of TZTL12F/15F is the same as TZT9/14/BB. You will still need to network both displays via Ethernet and NMEA2000. Notes: (1) Points and routes are shared automatically on the network. (2) Setting of TZTL12F/15F and TZT9/14/BB should be made individually. 6-12 No Network with NavNet 3D Do NOT mix the TZTL12F/15F with a MFD8/12/BB on the same network.
