User's Manual

15
5-2 Replacement from NavNet vx2 – Front Mounting for Model TZTL12F
10.4” NN1/VX2 display to TZTL12F with OP05-15 (001-337-430-00)
A 10.4” NN1/VX2 display has a larger cutout hole than a TZTL12F. The adapter panel OP05-15 (Part #
001-337-430-00) helps to fill the hole and install the TZTL12F from the front side. While both OP05-15
(001-337-430-00) and OP-16 (001-337-440-00) in Section 5-3 work as front mounting panels, the OP05-15
(001-337-430-00) below is recommended due to its smaller size.
NN1/VX2 10.4’ display to TZTL15F
The TZTL15F has a larger hole compared to a NN1/VX2 10.4” display. Enlarge the existing cutout when replacing the
NN1/VX2 10.4” display with TZTL15F.