Manualshelf

User's Manual

ManualsBrandsFuruno ManualsNavNetFuruno TZTL12F
11121314151617181920
16
5-3 Replacing a NavNet 3D MFD12 – Front Mounting for Model TZTL12F
MFD12 to TZTL12F with OP05-16 (001-337-440-00)
The MFD12 has a larger cutout hole than a TZTL12F. The adapter panel OP05-16 (Part # 001-337-440-00) helps to fill
the hole and install the TZTL12F from the front side. While both OP05-15 (001-337-430-00) in Section 5-2 and OP-16
(001-337-440-00) works as front mounting panels, the OP05-15 (001-337-430-00) is recommended due to its smaller
size.
MFD12 to TZTL15F
The TZTL15F has a larger hole compared to a 10.4” NN1/VX2 display and MFD12. Enlarge the existing cutout when
replacing the NN1/VX2 display and MFD12 with a TZTL15F.