User Manual

S
PECIFICATIONS
Width (Controller): 1.14in [29mm]
(Gyro sensor): 0.83in [21mm]
(Speed sensor): 0.30in [7.5mm]
Length (Controller): 1.73in [44mm]
(Gyro sensor): 0.83in [21mm]
(Speed sensor): 0.63in [16mm]
Height (Controller): 0.47in [12mm]
(Gyro sensor): 0.31in [8mm]
(Speed sensor): 0.39in [10mm]
Weight (Controller): 0.459oz [13g]
(Gyro sensor): 0.353oz [10g]
(Speed sensor): 0.141oz [4g]
Maximum* Operating Voltage : 3.8V to 8.4V DC
Current Drain: 80mA
Selectable Servo Frame: 70Hz, 280Hz and
570Hz(Gyro only) Rate
Center Pulse Width:
1520μS (70Hz & 280Hz
Frame Rate)
Flight Mode: User selectable F3C
or 3D (Gyro)
Control Resolution: 0.1Hz (6rpm)
(Engine speed)
Speed stability accuracy: 1%
Speed Control Range: 1,000-3,000rpm
(Rotor speed)
Operating Temperature: 14°F to 113°F
(-10°C to +45°C)
Control System: Digital advanced control
Sensor: Vibrating structure gyro/
Magnetic sensor
(Gyro/Governor)
Angular Velocity Range: ±1,200 Degrees Per
Second (Gyro)
* The maximum operating voltage listed only applies to
the GY701. Always verify that your receiver, servos,
tail rotor servo, switch and any other electronic com-
ponents used in your installation are capable of operat-
ing at the voltage you plan to use.
14