User Manual

O
PENING
S
CREEN
22
The GY701 starts the initializing process when
powered up. After it is finished initializing, the
GY701 starts initializing and moves to the home
screen.
Boot up display
The OLED shows the screen below. The upper
line indicates the identification code of the GY701
and the line below indicates the firmware version.
Initializing display
The helicopter images are displayed during ini-
tializing. After completing the initialization, the
rudder servo moves CW-> CCW as it finishes and
moves to home screen. The helicopter must not be
moved during the initializing process.