User Manual
G
YRO
B
ASIC
S
ETTING
32
This sets the gyro’s fundamental functions. The
menu (4) Servo limit point setting should be set
first.
(1) Start display
The editing menus are
scrolled by pushing the mode
+ or – key.
(2) Servo type [default: DG:1520]
Selection of the servo type to be used. The
SERVOTYPEISCHANGEDTO$IGITAL$IGITAL
OR!NALOGBYPUSHINGDATAORnKEY
DG 760: BLS251, S9256, S9251
DG 1520: BLS254, BLS257, S9254, S9257
(3) Gyro direction
[default: Normal]
Setting the gyro operation direction. Set the direc-
tion as the gyro operates the servo to right direc-
tion when the helicopter moves to left. The direc-
tion is changed by pushing the data+ or – key.
Push MODE
+/– key
ｎ
WARNING
ｊ
This parameter must match the type of ser-
vo you are using. Incorrect setting may damage
the GY701 or the servo, possibly resulting in a
loss of control during flight.