User Manual

B
EFORE
F
LIGHT
C
HECKLIST
Transmitter and Receiver batteries are fully
charged.
The gyro mounting pads are in good condi-
tion.
The gyro wiring has some slack in it and all
wires are clear of the main frame.
Power on the transmitter and receiver. Allow
the gyro to initialize.
The GY701 servo type parameter matches
the servo you are using.
The Tail rotor servo arm is perpendicular to
the pushrod and the pitch slider is centered.
The servo does not bind when full left or full
right tail rotor is applied.
The gyro is operating in the correct mode
(AVCS or Normal).
The tail rotor stick operates the tail rotor the
correct direction.
The gyro compensates the correct direction
when the helicopter is rotated.
The gain is set correctly and the gyro oper-
ates in the correct mode (AVCS or Normal)
in every flight condition.
38