User's Guide

ManualsBrandsFuzhou PEPE Electronics Technology ManualsAlarm SystemsElectric bike/ motorcycle alarm system

Fuzhou PEPE Electronics Technology Co., Ltd.

No.9, Gaowang Rd., Gaishan Investment Zone, Cangshan District, Fuzhou, Fujian, P.R, China

Tel: +86 (591) 8326 9076

For technical assistance: Support@eye-home.com

For detailed information: Sales@eye-home.com

FCC Notice

FCC ID: 2AT52-EC-3201

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two

conditions: (1) this device may not cause harmful interference, and (2) this device must

accept any interference received, including interference that may cause undesired operation.

EC-E2001GB

E-bike / E-Scooter Alarm System

Installation Manual and User’s Guide

ECR-006

Summary of content (4 pages)

PAGE 1
EC-E2001GB Fuzhou PEPE Electronics Technology Co., Ltd. No.9, Gaowang Rd., Gaishan Investment Zone, Cangshan District, Fuzhou, Fujian, P.R, China E-bike / E-Scooter Alarm System Tel: +86 (591) 8326 9076 For technical assistance: Support@eye-home.com Installation Manual and User’s Guide For detailed information: Sales@eye-home.com FCC Notice FCC ID: 2AT52-EC-3201 This device complies with Part 15 of the FCC Rules.
PAGE 2
Before Installation: Basic Features: • Please check that your electric bike is fully charged and that all electrical circuits are in good working condition. • System arming / disarming • Waterproof remote key • Built-in shock sensor • Low power consumption • Remote panic mode • Compact design built-in 120 dB siren • Silent arming / disarming Wire Connections • Power Save mode The factory default connector is a 2PIN connector.
PAGE 3
Dimensions: System disarming Press the Disarm button once, sire one time and system is disarmed. Now user can start the bike. Panic mode The system is armed state, press the Locate button once, the siren will sound for 15 seconds. Press the Disarm button to stop the alarm, and the system remains an armed state. Power save mode The system will automatically enter the power save mode 24 hours after it’s been set to the armed state. The system bypass remote control function.
PAGE 4
Programming the remote Caution: The user is cautioned that changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.