Operation Manual

18
Changing the programme
When the START button )" has been pressed, the
programme cannot be changed.
The only way a programme can be changed is by
Cancel programme (Reset).
Intensive drying
The final rinse uses a higher temperature which
improves the drying result. The running time may
increase slightly. (Caution if utensils are delicate!)
1 Open the door.
2 Switch on ON/OFF switch (.
3 Hold down programme button # and press
START button )" until •:‹.... is indicated on the
digital display.
4 Release both buttons.
The LED for button # flashes and the digital
display 8 displays the factory setting •:‹….
5 Press programme button # until the factory set
value š:‹‹ is indicated on the digital display 8.
To change the setting,
1 Press the button 3 to switch the Intensive
drying on š:‹‚ or off š:‹‹.
2 Press START button )".
The set value is saved.
3 Close the door.
Maintenance and care
A regular inspection and maintenance of your machine
will help to prevent faults. This saves time and
prevents problems.
Overall condition of the machine
 Check spray arm for grease and limescale
deposits.
If you find such deposits:
 Fill detergent dispenser with detergent. Start the
appliance without utensils in the programme with
the highest rinsing temperature.
Clean the appliance with detergents/appliance
cleaners which are particularly suitable for use with
dishwashers.
 Regularly clean door seal with a damp cloth.
Never use a steam cleaner to clean your dishwasher.
The manufacturer is not liable for any consequential
damage.
Regularly wipe the front of the appliance and fascia
with a damp cloth; water and a little washing up liquid
are adequate. Do not use sponges with a rough
surface or abrasive detergents, as these could scratch
the surfaces.
Stainless steel appliances: To prevent corrosion, avoid
using sponge cloths or wash them out thoroughly
several times before using for the first time.
ã=Warning
Never use other chlorinated household detergents!
Health hazard!
Special salt and rinse aid
 Check the refill indicators H and P. If
required, refill salt and/or rinse aid.