Operation Manual

19
Filters
The filters 1Z keep large foreign objects in the
rinsing water away from the pump. These foreign
objects may occasionally block the filters.
The filter system consists of a coarse filter, a flat fine
filter and a microfilter.
1 After each washing cycle check the filters for
residue.
2 Unscrew filter cylinder as illustrated and take out
filter system.
3 Remove any residue and clean filters under
running water.
4 Re-install filter system in reverse sequence and
ensure that the arrow marks are opposite each
other after closing the filter system.
Spray arms
Limescale and contaminants in the rinsing water may
block nozzles and bearings on the spray arms 1B and
1J.
1 Check outlet nozzles on the spray arms for
blockages.
2 Unscrew the upper spray arm 1B.
3 Remove the lower spray arm 1J upwards.
4 Clean spray arms under running water.
5 Re-engage or screw on spray arms.

