SDS

99717357_RET_NG - Gain Fabric Softener - Original Revision Date: 03-Mar-2015
later disposal. Prevent product from entering drains. Prevent further leakage or spillage if
safe to do so.
Methods for cleaning up
Contain spillage, and then collect with non-combustible absorbent material, (e.g. sand,
earth, diatomaceous earth, vermiculite) and place in container for disposal according to
local / national regulations (see section 13).
7. HANDLING AND STORAGE
Precautions for safe handling
Advice on safe handling
Use personal protective equipment as required. Keep container closed when not in use.
Never return spills in original containers for re-use. Keep out of the reach of children.
Conditions for safe storage, including any incompatibilities
Storage Conditions
Keep containers tightly closed in a dry, cool and well-ventilated place.
Incompatible products
None known.
8. EXPOSURE CONTROLS/PERSONAL PROTECTION
Control parameters
Exposure Guidelines
No exposure limits noted for ingredient(s).
Exposure controls
Engineering Measures Distribution, Workplace and Household Settings:
Ensure adequate ventilation
Product Manufacturing Plant (needed at Product-Producing Plant ONLY):
Where reasonably practicable this should be achieved by the use of local exhaust
ventilation and good general extraction
Personal Protective Equipment
Eye Protection Distribution, Workplace and Household Settings:
No special protective equipment required
Product Manufacturing Plant (needed at Product-Producing Plant ONLY):
Use appropriate eye protection
Hand Protection Distribution, Workplace and Household Settings:
No special protective equipment required
Product Manufacturing Plant (needed at Product-Producing Plant ONLY):
Protective gloves
Skin and Body Protection
Page 3 / 6
Distribution, Workplace and Household Settings:
No special protective equipment required
Product Manufacturing Plant (needed at Product-Producing Plant ONLY):
Wear suitable protective clothing
Respiratory Protection Distribution, Workplace and Household Settings:
No special protective equipment required