User's Manual
Table Of Contents
- Table of Contents
- About This Manual
- Chapter 1 GS2101M Overview
- Chapter 2 GS2101M Architecture
- Chapter 3 Pin-out and Signal Description
- Chapter 4 Electrical Characteristics
- Chapter 5 Package and Layout Guidelines
GS2101M Low Power WiFi Module Data Sheet
GS2101M-DS-001270, Release 1.0 Confidential 17
Ordering Information
To order GainSpan’s GS2101Mxx low power module contact a GainSpan Sales/Distributor
Representative. Table 6, page 17 lists the GainSpan device information.
Table 6 GS2101Mxx Ordering Information
Device Description Ordering Number Revision
Low power module with on-board antenna GS2101MIP 1.0
Low power module with external antenna GS2101MIE 1.0
NOTE: Modules ship with test code ONLY. Designers must first program the
modules with a released firmware version. Designers should bring out GPIO31
pin (option to pull this pin to VDDIO during reset or power-on) and UART0 or SPI0
pins to enable programming of firmware into the module. For details refer to the
Programming the GainSpan Modules document.