Datasheet

GW GTX1070_Phoenix_GS_bar code: 426018336-3682
© 2016 NVIDIA Corporation. NVIDIA, the NVIDIA logo, and GeForce are registered trademarks of NVIDIA Corporation in the U.S. and other
countries. All rights reserved.
Expertool II
Extreme silent acoustics in heavy
loading mode
Extreme cool temperature in heavy
loading mode
Gainward GeForce GTX 1070 Phoenix “GS” with factory
over-clocked speed gets much quieter than founders
edition board under full load operation.
Gainward GeForce GTX 1070 Phoenix “GS” with factory
over-clocked speed performs extremely lower GPU
temperature than founders edition board with reference
clock.
Gainward’s Expertool II – the brand-new utility adds
flexible fan curve control and BIOS saving feature for
powerful GeForce GTX 1070 card.
Gainward superior
hardware design
Gainward re-designs the entire hardware, that
brings higher stability under high current operation
(heavy loading operation).
8 PWM Power for GPU Cores
Gainward uses 8 phases for GPU cores that helps
to supply enough fuel to the 3D graphics engine.
This design minimizes current loading and heat
generation for each phase to stabilize the voltage
level , the overall efficiency can be improved, the
choke noise and EMI noise also be reduced.
DrMOS
DrMOS is designed to handle high current with low
noise operation and less heat generating.
Dual BIOS (1: OC, 2: standard)
Gainward provides two VBIOS for GeForce GTX 1070
Phoenix board. Factory over-clocking VBIOS is set on
position 1 of the “dual BIOS switch” . Users can over-
clocking the Phoenix board with confidence thanks to
the “standard-clock setting” in the second VBIOS with
position 2 of the “dual BIOS switch” whenever you
need.