Owner's manual

6
TOLL FREE HELP LINE 1 855 691 5969
MODEL Y4007
MINI CULTIVATOR AND DETHATHER
BURNS AND FIRES
Certain parts of this unit such as the muffler, muffler guard and engine parts become extremely hot during the
opera
on of this unit. These parts will remain extremely hot even a er the unit has been turned off and
stopped running
Preven
on of Burns and Fires
● Never remove the muffler guard from the engine
● Never touch the muffler guard. It is extremely hot and will cause burns
● Never touch engine parts that have become hot during opera on
● Always keep flammable debris away from muffler guard and other hot parts of the engine
The engine of this unit is designed to be operated using a cataly
c converter which complies with EPA
requirements.
Steps for Working on the Unit's Engine
● Turn off the unit's engine switch
● Disconnect the Spark Plug wire from the Spark Plug
● Always place the disconnected Spark Plug wire away from the Spark Plug to prevent arching from the
Spark Plug and metal parts
● Now you may replace parts or repair the unit
● When complete check to make sure all parts that have been removed are ghtly secured
NOTE: All repair parts for this unit must come from the factory or our authorized service center.
Never replace parts that are not specifically designed for this unit and its engine.
1. Replace Spark Plug Wire
HOT GASES ARE A NORMAL BY PRODUCT OF A
PROPER FUNCTIONING CATALYTIC CONVERTER.
PLEASE FOLLOW ALL SAFETY INSTRUCTIONS TO
PR
EVENT BURNS AND FIRES!
NEVER ALTER OR MODIFY THE UNIT'S ENGINE
NEVER ALTER OR MODIFY THIS UNIT'S FACTORY
E
NGINE. IF YOU DO SO, SERIOUS INJURY OR
DEATH COULD RESULT!
WHEN WORKING ON UNIT OR REPLACING PARTS,
YOU MUST ALWAYS DISCONNECT THE SPART
PLUG WIRE FROM THE SPARK PLUG AND KEEP THE
WIRE SEPERATED FROM THE PLUG
CAUTION!