Manual

Part # 1009067 Rev13 (12/04/09) Page 7
GENERAL INFORMATION
Product Information
36 Series Ranges are designed to battery with other 36 Series
equipment.
Construction
Heavy duty modular construction minimizes the use of hard
to clean screws and bolts on exterior of range. Cleaning is
made easier and more complete.
Circuit Breakers
Supplied standard except for open elements. Fuses are used
for open elements.
Grease Troughs
Front and rear, catch excess grease and spillage. Drain into
grease pans located under range top.
Service
Service and maintenance is done completely from the front.
Oven Base
Giant capacity oven is 26 1/2” (667 mm) wide x 29” (736 mm)
deep x 12 1/2” (318 mm) high. Heavy duty thermostat with
pilot light provides temperature control between 200°F
(93°C) and 500°F (290°C). Top element 3 k.W. and bottom
element 3.5 k.W. each controlled by three heat switch for
exibility of heat. One heavy duty rack is standard. Additional
racks are available at extra cost. Exclusive heat ow oven
design eliminates hot spots and gives consistently even oven
temperatures. Aluminum clad steel oven interior reects heat
back to product and ensures long life. Oven door and oven
deck nished in porcelain. Oven door is heavy duty typed
designed to bear in excess of 250 lbs, (113Kg) load. Spring
adjustment is accessible from front of range.
Storage Base
A storage base with stainless steel doors is available.
Modular Top
For mounting on a custom made stand.
Venting
All ranges are supplied with standard 3” (76 mm) high
stainless steel vent riser. Double Deck High Shelf available
in sizes from 18” (476 mm) to 72” (1829 mm) wide. Standard
nish is stainless steel front with brushed chrome splash wall
and aluminum clad back. Optional nish is stainless steel
shelves, sides and back. A satisfactory power ventilator such
as Vent Master properly adapted to the range may be used.
Rating Plate
When corresponding with the factory refer to the particular
unit by the correct model number (including prex and sux
letters and numbers) and the serial or code number. The
rating plate axed to the unit contains this information.
Before attempting the electrical connection, the rating
plate should be checked to ensure that the unit’s electrical
characteristics and the supply electrical characteristics agree.
Unit rating plate is located behind the lower front panel.
Optional extended warranty
Garland,
With a tradition of superior equipment quality and
performance, oers you, our valued customer, an additional
one year limited warranty beyond our standard one year
coverage.
This additional coverage for parts and labor may be
purchased on a new equipment order or up to 60 days after
the equipment purchase. Please contact your Equipment
Dealer or Maintenance & Repair Center (list enclosed) to take
advantage of this exception oer.
Thank you for using Garland products. It is our pleasure to
serve you.