Owner's Manual
Table Of Contents
- Owner’s Manual
- Table of Contents
- Getting Started
- Off-Road Navigation Features
- inReach® Features
- Using the Map
- Dog Tracking
- Using the Apps
- Live Services, Traffic, and Smartphone Features
- Street Navigation
- Finding and Saving Locations
- Finding a Location Using the Search Bar
- Location Search Results
- Changing the Search Area
- Finding a Location by Category
- Points of Interest
- Finding Parking Near Your Current Location
- Finding Parking Near a Specified Location
- Search Tools
- Viewing Recently Found Locations
- Viewing Current Location Information
- Adding a Shortcut
- Saving Locations
- Driver Awareness Features and Alerts
- Settings
- Navigation Settings
- Map and Vehicle Settings
- Connecting to a Wireless Network
- Enabling Bluetooth Wireless Technology
- Driver Assistance Settings
- Traffic Settings
- Display Settings
- Adjusting Sound and Notification Volume
- Setting the Text Language
- Date and Time Settings
- Device Settings
- Enabling or Disabling Location Services
- Device Information
- Device Maintenance
- Troubleshooting
- Appendix
- Garmin PowerSwitch
- Tread Audio
- Tools and Materials Needed
- Tread Audio Box Mounting Considerations
- Mounting the Tread Audio Box Black Box Device
- Connections
- Wireless Remote Mounting Considerations
- Mounting the Speakers and Brackets
- Wireless Remote Overview
- Pairing with a Garmin Navigation Device
- Tread Audio Box Specifications
- Tread 6.5" XS-LED Tower Speakers Specifications
- Bracket Specifications
- Data Management
- Purchasing Additional Maps
- Quick Start Guide
- Important Safety and Product Information
NOTICE
Do not connect the accessory ground wires to the ground terminal (GND) on the Garmin PowerSwitch
device. Failure to heed this notice could result in personal or property damage, or negatively impact device
functionality.
3 Verify that all electrical connections are tight and will not come loose during use.
Connecting a Control Input
You can connect to the control terminals to enable the Garmin PowerSwitch device to turn on customizable
outputs. For example, you can connect your vehicle ignition switch to a control input terminal to turn on
accessories automatically each time you start your vehicle. The control terminals detect a signal from 3.3 V to
18 V. You can configure output functions with the Garmin PowerSwitch app.
Connect the control wire from the control source in your vehicle to one of the two control terminals on the
Garmin PowerSwitch device.
Connecting the Device to Vehicle Power
Before you can connect the device to vehicle power, you must remove the warning tag from the +12V terminal
on the device.
You should always confirm all electrical connections are secure and will not come loose while operating the
device.
1 Connect the large ring end of the included ground wire to the negative terminal on the vehicle battery.
2 Connect the small ring end of the ground wire to the GND terminal on the device.
66 Appendix