Owner's Manual
Table Of Contents
- Owner’s Manual
- Table of Contents
- Getting Started
- Off-Road Navigation Features
- inReach® Features
- Using the Map
- Dog Tracking
- Using the Apps
- Live Services, Traffic, and Smartphone Features
- Street Navigation
- Finding and Saving Locations
- Finding a Location Using the Search Bar
- Location Search Results
- Changing the Search Area
- Finding a Location by Category
- Points of Interest
- Finding Parking Near Your Current Location
- Finding Parking Near a Specified Location
- Search Tools
- Viewing Recently Found Locations
- Viewing Current Location Information
- Adding a Shortcut
- Saving Locations
- Driver Awareness Features and Alerts
- Settings
- Navigation Settings
- Map and Vehicle Settings
- Connecting to a Wireless Network
- Enabling Bluetooth Wireless Technology
- Driver Assistance Settings
- Traffic Settings
- Display Settings
- Adjusting Sound and Notification Volume
- Setting the Text Language
- Date and Time Settings
- Device Settings
- Enabling or Disabling Location Services
- Device Information
- Device Maintenance
- Troubleshooting
- Appendix
- Garmin PowerSwitch
- Tread Audio
- Tools and Materials Needed
- Tread Audio Box Mounting Considerations
- Mounting the Tread Audio Box Black Box Device
- Connections
- Wireless Remote Mounting Considerations
- Mounting the Speakers and Brackets
- Wireless Remote Overview
- Pairing with a Garmin Navigation Device
- Tread Audio Box Specifications
- Tread 6.5" XS-LED Tower Speakers Specifications
- Bracket Specifications
- Data Management
- Purchasing Additional Maps
- Quick Start Guide
- Important Safety and Product Information
Connecting the Device to Vehicle Power
You should always confirm all electrical connections are secure and will not come loose while operating the
device.
NOTICE
If the ignition wire is not used, do not tie the ignition to the positive terminal on the vehicle battery. Ground the
ignition wire or leave it disconnected. Failure to ground or disconnect the ignition wire when the ignition is not
used could prevent the device from powering on.
1 Remove the terminal cover using a Phillips screwdriver.
2 Remove the screws from the GND terminal and the +12V terminal .
3 Connect the large ring end of the included ground wire to the negative terminal on the vehicle battery.
74 Appendix