Owner's Manual
Table Of Contents
- Owner’s Manual
- Table of Contents
- Getting Started
- Off-Road Navigation Features
- inReach® Features
- Using the Map
- Dog Tracking
- Using the Apps
- Live Services, Traffic, and Smartphone Features
- Street Navigation
- Finding and Saving Locations
- Finding a Location Using the Search Bar
- Location Search Results
- Changing the Search Area
- Finding a Location by Category
- Points of Interest
- Finding Parking Near Your Current Location
- Finding Parking Near a Specified Location
- Search Tools
- Viewing Recently Found Locations
- Viewing Current Location Information
- Adding a Shortcut
- Saving Locations
- Driver Awareness Features and Alerts
- Settings
- Navigation Settings
- Map and Vehicle Settings
- Connecting to a Wireless Network
- Enabling Bluetooth Wireless Technology
- Driver Assistance Settings
- Traffic Settings
- Display Settings
- Adjusting Sound and Notification Volume
- Setting the Text Language
- Date and Time Settings
- Device Settings
- Enabling or Disabling Location Services
- Device Information
- Device Maintenance
- Troubleshooting
- Appendix
- Garmin PowerSwitch
- Tread Audio
- Tools and Materials Needed
- Tread Audio Box Mounting Considerations
- Mounting the Tread Audio Box Black Box Device
- Connections
- Wireless Remote Mounting Considerations
- Mounting the Speakers and Brackets
- Wireless Remote Overview
- Pairing with a Garmin Navigation Device
- Tread Audio Box Specifications
- Tread 6.5" XS-LED Tower Speakers Specifications
- Bracket Specifications
- Data Management
- Purchasing Additional Maps
- Quick Start Guide
- Important Safety and Product Information
6 Connect the speaker and LED wires (Wiring, page 80).
7 Place the connected wires in the channel on the base of the bracket , and route the wires along the roll
bar.
8 Place the top of the bracket over the roll bar, and hold it against the base of the bracket.
9 Using a 5 mm hex driver or hex key, attach the top of the bracket to the base of the bracket using the two
longer screws and washers , but do not fully tighten them.
10 Adjust the angle of the speakers, and tighten all of the screws to secure the speaker to the roll bar, observing
these maximum torque measurements:
• For the longer screws that secure the bracket to the roll bar , do not tighten to more than 4 N-m
(2.95 lbf-ft.).
• For the shorter screws that secure the bracket to the speaker , do not tighten to more than 2.5 N-m
(1.84 lbf-ft.).
NOTICE
Tightening the screws more than the specified maximum torque measurement can damage the bracket.
11 Repeat these steps for additional brackets.
12 Route the speaker and LED wires along a suitable path in your vehicle, and secure them using the included
zip ties.
Appendix 79