Operation Manual
Table Of Contents
- GPSMAP 172/172C
- Introduction
- Getting Started
- Keypad Usage
- Selecting Options
- Entering Data
- Initializing the Receiver
- Power On/Screen Backlighting
- Simulator Mode
- Main Pages/Map Page
- Map Cursor
- Marking Waypoints
- Using the NAV Key
- Simulated Tour
- Reviewing/CreatingMap Waypoints
- Compass Navigation Page
- Highway Page
- Active Route Page/Main Menu Page
- Deleting Waypoints/Powering Off Unit
- Reference
- Map Page
- Map Page: Cursor
- Map Page: Options
- Compass Page
- Highway Page
- Highway Page Options
- Creating Waypoints
- Reviewing/Editing Waypoints
- Waypoint Lists
- Going to a Destination
- TracBack Navigation
- MOB: Man OverBoard
- Creating Routes
- Creating a Route/Following a Route
- Route List Page
- Route Review Page
- Editing Routes
- Active Route Page
- Find Key
- Find Options
- Main Menu Tabs
- Main Menu:GPS Tab
- Main Menu:Tide Tab
- Main Menu: Trip/
- Main Menu: Track Tab
- Main Menu: DSC Tab
- Main Menu: DSC/Card Tabs
- Main Menu: Temp Tab/Setup Tab
- Main Menu: Comm Tab
- Main Menu: Alarm Tab
- Appendix
- Index
Route Review Page
Once you have created a route, the Route Review page allows you to edit a selected route.
To access the Route Review page:
1. Press MENU twice and highlight the ‘Route’ tab.
2. Highlight the name of the route you wish to review and press
ENTER.
The Route Review page also allows you to enter a 15-character name for any listed route. By
default the name includes the first and last waypoints in the route.
To enter a custom route name:
1. From the Route Review page, highlight the name field and press ENTER to begin editing.
2. Use the ARROW KEYPAD
to enter the desired name and press ENTER when finished.
Once you are on the Route Review page, you may review the route points (waypoints or map
items) one at a time from the list.
To review individual route points:
1. Highlight the desired point and press ENTER.
2. On the Point Review window, you may choose ‘Next’ (highlight the next point on the route list),
‘Show Map’ (show the point on a map window), or ‘Delete’ (permanently delete the waypoint from
the unit) and press ENTER. If the route point is a user waypoint, you may edit any of the waypoint
properties on the Waypoint Review page (see pages 34 for details).
Once you are back on the Route Point List, the next point in the route is automatically highlighted.
This allows you to review each point on the route by repeatedly pressing ENTER.
Route Review Options Menu
By pressing MENU on the Route Review page, the following options are available: Edit on Map,
Add Before, Remove, and Trip Planning.
Route Review
Options Menu
Route Points
Data Fields
Route Name
Data Totals
46
Reference
Route Review Page